First, the main reason for the inaccurate or small test value is that the air in the fuel tank is not removed and the pressure of the plugged oil rises. The solution is as follows:
1. Loosen the oil cup bolts.
2. Press the rubber membrane a few times, and if there is air, bubbles will emerge from the oil cup.
3. Hold down the rubber membrane for about ten seconds. After the air is exhausted, tighten the bolts.
4, if you can not achieve the ideal state of the above 3 points, click the reset button, wait 5 to 10 seconds waiting for the machine to automatically back pressure, and then open the oil cup bolt, until the rubber membrane automatically bulging, repeatedly click the test button, that is, Can exclude air.
Second, hit a slightly thicker cardboard cracking degree is smaller KD series burst strength testing machine in the factory when the system is set within a larger proportion of breakpoints, suitable for most manufacturers to use, if the test board is thick, can be adjusted by the following methods :
The solution is as follows:
1, turn off the machine power switch.
2, start the machine power switch, hold down the set button and then enter the system settings interface.
3. The time setting page displayed on the first page, the setting key is a shift function, the print key is an increase value, the peak key is a confirm function, and the next screen is entered.
4. The second interface is the time setting page. Click the peak key to enter the third page, that is, the breakpoint ratio setting page 5, the general paper object after 20KG, and the breakpoint ratio is adjusted to 80 to achieve the break requirement, and the breakpoint ratio. The smaller the sensor is, the bigger the breakage value of the grab is, and the larger the breakpoint ratio is, the smaller the sensor grabs, so when we ask for a thicker cardboard, we can adjust the breakpoint ratio to about 60, but This reminds our customers not to adjust the breakpoint proportion too small, which will reduce the service life of the rubber film.
Third, the full automatic rupture strength tester correct operating procedures:
1, boot 2, clear 3, peak 4, start 5, set (save)
To remind the majority of customers, fully automatic burst strength testing machine must pay attention to press the clear key once after each test, if you do not press the clear key, the next test will automatically record the last peak, it is easy to break the rubber film .
Press the Setup key to save the data so that the machine can store data for printing data.
Jump Machinery (Shanghai) Limited is a modern high-tech joint stock enterprise specialized in the turnkey production line of concentrated juice, jam, pulp, tropical fruits, herb and tea beverages, carbonated drinks, wine, beer, yogurt, cheese, milk, butter etc. At the same time, Jump is also committed to manufacturing various food machinery, such as Can Food Machinery , Fruits Juice Machinery, Tomato Sauce Machinery, Fruits Jam Machinery, Dairy Machinery etc.
Jump is able to supply service from A to Z about your project, not only machine manufacturing, installation commissioning, technical training, after-sales service, but also before-sales service, including factory building construction drawings, facilities layout, and water, electricity, boiler steam. Jump has a professional team to help clients to design the layout on worksite and draft the implementation plan, program schedule and expense estimation in each stage of the project until the production line starts the project.
As an industry leader, it has the best projects, professional engineers and technicians, strong R&D department with a number of masters and PhD of food engineering & packaging machinery, stable long-term development and highly rated customer experience in every province in China and also in Africa, the Middle East, Southeast Asia, Oceania, Europe and America.
Pasta Turnkey Production Line,Pasta Production Line,Spaghetti Production Line,Fresh Pasta Production Line
Jump Machinery (Shanghai) Limited , https://www.shanghaimachineres.com