Chamber blasting design specification

        1 One of the following conditions should be used for chamber blasting:
        (1) It is difficult to construct the stripping of the isolated hills or steep terrain of the highway;
        (2) The use of chamber blasting can speed up the construction of the project or save investment.
        2 The final slope of open pit mines should not be used for chamber blasting. Chamber blasting should not be used in high slope sections.
        3 The choice of blasting type should meet the following requirements:
        (1) When the explosion area and the surrounding terrain are relatively flat or the height is less than 30m , there is no condition to throw the rock outside the final boundary, or when the construction or structure near the explosion area needs protection, loose blasting should be adopted;
        (2) When the topographical diffusion conditions around the blasting area are good, and some rocks can be directly thrown outside the final boundary or the infrastructure stripping range, the terrain area ratio of the blasting area is greater than 40m . In order to reduce the terrain height, it should be adopted when achieving the purpose of shovel loading. Strengthen loose blasting;
        (3) When the stope is close to the dumping site, the terrain is conducive to throwing a large amount of rock directly to the dumping site, and when economically advantageous, throwing blasting should be used.
        4 The value of the blasting index n should be selected according to the following regulations:
        (1) Loose blasting should be taken from 0.4 to 0.7 ;
        (2) Strengthening loose blasting should take 0.75 ~ 1.0 ;
        (3) The throwing blast should be taken from 1.0 to 1.4 .
        5 Pharmacy layout, should meet the following requirements:
        (1) The explosive energy should be fully utilized according to the topography and the surrounding conditions of the explosion area, and the explosion pile distribution is reasonable;
        (2) The amount of guiding work should be small, and the construction should be safe and convenient;
        (3) When the height of the rock remains is less than 7m , the auxiliary medicine room may not be arranged.
        6 The standard K value of the standard throwing blasting explosive consumption should be selected according to the similar blasting data of the mine chamber and the test value of the same type of rock in the explosion area.
        7 The determination of the m value of the drug compartment spacing coefficient should meet the following requirements:
        (1) Loose blasting in the same layer, strengthening loose blasting, throwing blasting, 1.0 to 1.2 should be taken between the main drug rooms , and 1.0 to 1.4 should be taken between the main and auxiliary drug rooms ;
        (2) The upper and lower layers of loose blasting and reinforced loose blasting should be taken from 1.2 to 1.6 ; the upper and lower layers of throwing blasting should be taken from 1.4 to 1.8 .

EVA Faux Teak Sheet

EVA Faux Teak Sheet comes in double layers EVA material, it appears grooves to show the bottom color after the roller cutting, which makes it looks like a teak wood. So instead of using a real wood for the boat flooring, more and more people put their focus on this no maintain and Eco-friendly EVA marine sheet.

EVA Faux Teak Sheet

Made from marine grade UV resistant, closed cell, high density EVA foam material, it stands perfectly even in a strong sunlight area. And the EVA foam material makes it softer and more comfortable for people standing there bare feet than real teak or PVC teak. Some would concerned if the boat mat would be not durable to use since it is made from foam material. Well, it may not hard like real teak or PVC teak, and compete the durability with those two, but with a higher density EVA foam, we are able to compete with other suppliers who try to compromise the density to reach to a lower price.


The sheet comes in 230cm x 90cm or 250cm x 120cm, user can cut the sheets into size to fit the shape of boat decking, then just peel and stick since the sheets we offer is with 3M adhesive on the backing. It can be applied on boat decking of course, and other like swim platform pad, helm station pad or simple seat pad.

EVA Faux Teak Sheet

What's more, this kind of sheets can be applied in recreation vehicle for luxury flooring, a safe traction mat for the edge of swimming pool, a beautiful looking for flooring in room or balcony.

Eva Faux Teak Sheet,Faux Teak Sheet,Foam Faux Teak Sheet,Faux Teak Strip,Faux Teak Edging,Eva Faux Teak Deck Sheet

Huizhou City Melors Plastic Products Co., Limited , https://www.grandfoam.com