Evaporative condenser assists aminoacetic acid industry to reduce consumption and increase production

Recently, the reporter learned from Hebei Weili Refrigeration Equipment Co., Ltd. that the company's highly efficient and energy-saving patented ZNX evaporative condenser was successfully used in Shijiazhuang Yuanshi Hongsheng Chemical Co., Ltd. With this device, the acetic acid output rate can be increased by 4%, the amount of raw material methanol can be reduced by 6%, and the traditional heat exchange equipment can effectively solve the problems of high water consumption, high power consumption, high operating cost, and short service life of the traditional heat exchange equipment. Short "problem.
According to reports, glycine is a fine chemical product whose greatest use is the synthesis of the herbicide glyphosate. The key to saving energy and reducing consumption of aminoacetic acid production is to increase the cooling effect of methanol, reduce the amount of methanol, and reduce the consumption of water and electricity. According to reports, the new condenser adopts advanced heat conduction technology and utilizes water film evaporation to take away latent heat. Compared with traditional air-cooled and water-cooled condensers, the heat exchange capacity is increased by several times; stainless steel wave tube is used instead of ordinary light. The tube increases the heat transfer coefficient and improves the condensation effect. The structure of the equipment changes from the original shell-and-tube or tube-type structure to the combined structure of a collecting tank, a cooling tower, a cooler, a pump, a tube, and a valve. Not only saves 80% of water in production, saves 25% of electricity, but also saves 40% of equipment and saves more than 50% of steel.
It is understood that following the successful application of this equipment at Yuanshi Hongsheng Chemical Co., Ltd. at the beginning of this year, 21 more equipments have been promoted and applied in 15 aminoacetic acid manufacturers in Hebei and Shandong provinces, all of which have achieved good results. Energy-saving effect is favored by glycine enterprises.

Terry Towel Warp Knitting Machine

Terry Towel Warp Knitting Machine is a highly-speed warp knitting machine, which running speed could up to 1,300RPM. Thanks to advanced technology and carbon fiber material widely used, warp knitting terry towel machine becomes more stable and higher productive compared with other terry machines.

A-ZEN TS4-C terry towel warp knitting machines, which also be called KS4FBZ, is equipped with Germany Needles, Carbon-fiber Needle bed and bars, laser-stops device as well as other market-tested spare parts, because of which A-ZEN terry towel machines gain a market acceptance since last 4 years.

Piles of warp knitting terry could reach to 6mm while back side of terry could be 3-4mm. The weight of warp knitting terry usually from 200-400gsm. Microfiber Polyester, Polyamaid and cotton yarn are available in warp knitting terry machine.

Technical Data:

Working Width/Gauge: 186"/ E24;

Working Speed: 50-1300rpm (Depends on yarn and designs);

Pattern Drive System: Pattern Disc or EL Drive (Optional);

Yarn Let-off Device: Electronical Yarn Let-off System;

Fabric Take-up: Electronical Fabric Take-up System;

Batching Device: Electronical Batching Device;

Laser Stops Detector;

Individual Terry Pile Brushing Device;

Online Service Supported.

Details please check machine leaflet.

Terry Towel Warp knitting machine,Terry machine,Microfiber towel machine

CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.barmachinery.com