Ford Says Software Fault Causes Overheated Engine of Recall Vehicle

Ford Says Software Fault Causes Overheated Engine of Recall Vehicle According to Reuters, Ford said on Monday that the overheating of the 89,000 Muggets and Fusions it recalled on November 30 was due to a failure of the software that monitored the car's cooling system.

It is reported that cooling system piping in these two vehicles will produce pressure loss under certain conditions, which will cause the engine to overheat during operation. Ford said it will update its cooling system monitoring software for the vehicle concerned.

Ford stated in a statement: "After the software is updated, under certain conditions, it will better control the engine temperature."

Ford’s report to the U.S. safety regulator showed that so far there have been at least nine car-fire accidents caused by the overheating of the engines of these two vehicles.

Since July this year, Ford has conducted a total of four recalls of the 2013 Wing Tiger, including two of its turbo engine failures. The 2013 Mavericks and Fusions are considered to be the two most failing models Ford released this year.

Car Using Condensator And Evaporator

Application:
Refrigerator, freezer and other refrigeration equipment evaporator

Raw materials:
1) Aluminum Tube: ¢8.0×0.7~1mm
2) Aluminum foil: sheet thickness T = 0.15 ~ 0.25mm
3) Side panel: aluminum plate T=0.8~1.5mm


Main Process:

1.Bending 2.Stamping 3.Expansion
4.Degreasing 5.Welding Assembly 6.Leak Detection
7.Drying 8.Inspection 9.Packing

Technical Specifications:
1) oblique insertion type: fin specification 50×19.05×N; 60×19.05×N (N≥4)
2) Expansion type: fin size 60×28; 52×28
3) Compression type: fin size 50.8×203.2

Can be customized according to customer drawings or sample requirements


Aluminum Tube Aluminum Fin Copper TubeAluminum Tube Aluminum Fin Copper Tube


Xinxiang Yukun Refrigeration Technology Co. is a production and sales of refrigeration two apparatus parts and sheet metal products, mainly engaged in condenser, evaporator, heat exchanger, reservoir, filter drier, Fin Evaporator (condenser), Stamping Parts, sheet metal parts, aluminum tubes for refrigeration, etc.


Our evaporator and condensers are being supplied to Norway, Russia, Ukraine, Korea, Japan, Pakistan, India, Malaysia, Indonesia, Sri Lanka, Bangladesh, Saudi arabia, Lebanon, Syria, Turkey, Italy, Britain, Spain, Portugal, USA, Chile, Peru, Argentina, Brazil, Russia, Ukraine....for many years.


If you have any interest, pls feel free to contact with us at any time. We can supply copper evaporator and copper condensers according to your drawings or samples.




Aluminum Tube Aluminum Fin Copper TubeAluminum Tube Aluminum Fin Copper Tube

5

car,condensator,evaporator

Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.ycevaporator.com