Fuel Injector Analyzer and Cleaner for Car Repair

Technical data:
Test cylinder: Test the injecting state of six injectors at same time

Power: AC220V±10%; 50~60Hz; 500W
Working temperature:+5ºC~40ºC;
humidity:<85%;
Intensity of outside magnetic field:<400A/m
Fuel tank capacity: 2.4L
Test tube capacity: 100ml
System flow: 4L/min
Rotate speed: 0-9950r/min; step: 50 r/min
Pulse width: 0-20ms;step: 0.1 ms
Count (time): 0-9950;step: 50

System pressure: 0-5.0kg/cm²(variable regulated)

Simulate injecting state to make test.

Regulate the fuel feed pressure by mechanized mode.

Build-in ultrasonic device, return the test fluid by upturning the tubes group.

Test fluid and detergent is innocuous and non-flammable, can be repeat used.

Technical data:
Test cylinder: Test the injecting state of six injectors at same time

Power: AC220V±10%; 50~60Hz; 500W
Working temperature:+5ºC~40ºC;
humidity:<85%;
Intensity of outside magnetic field:<400A/m
Fuel tank capacity: 2.4L
Test tube capacity: 100ml
System flow: 4L/min
Rotate speed: 0-9950r/min; step: 50 r/min
Pulse width: 0-20ms;step: 0.1 ms
Count (time): 0-9950;step: 50

System pressure: 0-5.0kg/cm²(variable regulated)

Simulate injecting state to make test.

Regulate the fuel feed pressure by mechanized mode.

Build-in ultrasonic device, return the test fluid by upturning the tubes group.

Test fluid and detergent is innocuous and non-flammable, can be repeat used.