Heavy medium dressing equipment is available in both dynamic and static types. Dynamic type heavy medium vibration chute, heavy medium cyclone and heavy medium vortex sorter, static type drum sorting machine, conical sorting machine, pyramidal sorting machine, shallow trough Sorting machine and cylindrical sorting machine. The common advantages of heavy medium mineral processing equipment are coarse grain size, large processing capacity, strong adaptability to feed change, high precision of selection and low cost of selection; the disadvantage is that the ore needs to be washed or sieved to remove fine before being selected. Granules are also equipped with a complex media preparation and media purification recovery system. The selection of heavy medium mineral processing machinery and equipment should be treated with caution according to the nature of the ore, preferably by testing or by reference to the production practices of similar concentrators. The following list explains:
| Equipment type | Sorting column | Sorting column is the largest | Minimum sorting column | Application characteristics | ||
| Coarse grain re-election equipment | Heavy medium dressing equipment | Vibrating chute drum sorting machine cone sorting machine vortex sorting machine heavy medium cyclone | 75～6 100～6 50～6 35～2 20～2 | 100 300 75 75 35 | 3 5 1.5 0.5 0.5 | The sorting has a coarse grain size, a large processing capacity, and high sorting precision, and is suitable for pre-selecting ore having a high depletion rate. Medium preparation and recycling process system is complicated |
| Rectangular large jig | 50~10 | 70 | 0.074 | The sorting precision is poor, the processing volume is large, and the process is simple. Sorting accuracy is not as good as heavy medium | ||
| Zhongra re-election | Jig | Side-moving diaphragm jig side diaphragm rectangular escape machine re-vibration jig round jig lower cone jig Guangdong type jig trapezoid jig | 12~0.1 12～O. 1 12～O. 1 12～O. 1 6～O. 1 6～O. 1 5 to 0.074 | 18 18 18 18 20 10 10 | 0.074 0.074 0.074 0.074 0.074 0.074 0.037 | Large processing capacity and high enrichment ratio for rough selection and selection |
| equipment | Taiwan floating | 5~0.2 | 6 | 0.074 | It can separate coarse-grained sulfide minerals, with many products, high sorting efficiency and small processing capacity. | |
| Shaker | 2~0.037 | 3 | 0.02 | The processing volume is small and the enrichment ratio is high. A variety of products are available, mostly for selection | ||
| Sand mine re-election equipment | Spiral concentrator spiral chute fan chute | 2~O. 1 0.6～O. 05 1.5～0.074 | 3 1.5 2 | 0.074 0.037 0.037 | The processing capacity is larger than the shaker, saving water and electricity, and the structure is simple. Low student ratio for rough selection | |
| Cone concentrator | 1.5～O. 074 | 2 | 0.037 | Large processing capacity, water and electricity saving, small floor space, low enrichment ratio, used for rough selection | ||
| Mud | Centrifugal concentrator | 0.074~0.01 | Large processing capacity and low enrichment ratio for coarse mud mining operations | |||
| Reselection device | Various belt chutes | 0.074~0.01 | Small processing capacity and high enrichment ratio for slime selection | |||
A carbon Steel Plate has usually been considered as the steel that does not contain much alloy steel elements, also named as mild steel. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc.
Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.
As the percentage of carbon gets larger, steel can become harder and stronger through heat-treating. Carbon steel is usually heated to change the mechanical properties of steel, usually ductility, hardness, strength, and resistance of impact. Increasing the carbon content of carbon steel makes it harder and stronger, but reduces the steel`s ability to be welded, making it more brittle.
Carbon steel plate is most often used for structural purposes such as buildings, yet it has the flexibility to be worked into ornate designs. Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.
Carbon Steel Plate,Carbon Steel Sheet,Hot Rolled Steel Plate,Ms Steel Plate
Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com