- Model NO.: DCGF24-24-8
- Customized: Customized
- Composition: Filling Machine
- Process: Mild Processing
- Material: Stainless Steel
- Certification: Ce / ISO
- Production Capacity(500ml): 2, 000-20, 000 B/H
- Structure: Rotary
- After-Sales Service: Engineers Available to Service Machinery Oversea
- Transport Package: Wooden Case
- Origin: Zhangjiagang, Jiangsu, China
- Condition: New
- Voltage: 380V
- Processing Material: Natural Ingredients
- Driven Type: Electric
- Automatic Grade: Automatic
- Control: PLC
- Warranty: 1 Year
- Applicable for: Carbonated / Gas-Contained Beverage etc.
- Trademark: RENDA
- Specification: 2360*1770*2400mm
- HS Code: 8422301090
 Filling Line Basic Specifications:
Â
| Product | Bottle Carbonated Drink |
| Temperature of filling | 3~5 Degree |
| Viscosity of product | Free flow |
| Capacity | 500 ML Volume Bottle 3,000CANS PER HOUR |
| Type of Bottle | PET bottle on volume 500ml |
| Type of Cap | Plastic screw on caps 28mm in diameter PCO28 |
| Type of Label | PVC Labels(Shrink Sleeve Labeling Machine) |
| Type of Packaging Style | PE Film Shrink Packaging 500 ML BOTTLES  PACKING (3X4 =12) BOTTLES |
| Voltage | 380V/60Hz/3 Phase 220V/50Hz/Single Phase |
| Ancillary | 24AV/DC |
The bottle enters into the rinsing part of three-in-one machine by air conveyor. The gripper installed on
the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the
special rinsing area, the nozzle on the clip sprays water to rinse bottle inner wall. After rinsing and draining,
the bottle turns over 180 degrees along the guide rail and make the bottleneck faces sky. Then rinsed bottle
is transferred to the filling part through poking bottle star-wheel. The bottle that enters into the filler is
hold by neck holding plate. The filling valve acted by the cam can realize up and down. It adopts pressure
filling way. The filling valve opens and begins filling when it moves down and touches the bottleneck, the
filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the
capping part through hold neck transition poking wheel. The stop screwing knife holds the bottleneck,
keeps bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can
finish a whole capping course including catching, pressing, screwing, discharging through the action of the
cam. The full bottle is transferred to bottle outlet conveyor to the next process through poking wheel. The
-whole machine is enclosed with windows, the height of enclosed window is higher than the peak of the 3 in 1 machine, in the bottom of the enclosed window has return air outlet
Bottle inlet structure
 Adopt air conveyor system with high efficient filter to feed bottle, this can keep the inside of the filling machine clean
With bottle neck holding in the whole course and protect bottle block device.
Â
Double layer shutter door forming machine,we can tell from its name.This machine can make double layer shutter door with pu insulation or nimeral wool.This double layer shutter door are used a lot for shpping mall.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously
Double Layer Insulted Shutter Door Forming Machine
Double Layer Insulted Shutter Door Forming Machine,Shutters Forming Machine,Forming Machine For Garage Door,Double Layer Door Forming Machine
Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com