How to monitor the main power and standby power of the silent diesel generator?

Monitoring objects and content: At present, the monitoring objects and contents of Hansa Silent Diesel Generator's main power supply and standby power supply centralized monitoring system include:

1 High-voltage power distribution equipment remotely measures three-phase voltage, three-phase current, high-voltage operating current and voltage. Remote signal transformer temperature is too high, gas alarm and so on.

2 Low-voltage power distribution equipment remotely measures the three-phase voltage, three-phase current, frequency, power factor, and temperature of important parts of the incoming cabinet. Remote signaling main switch status, phase loss, over voltage, under voltage, etc. Remote control important distribution switch.

3 Rectifier equipment remotely measure AC input voltage and current, DC output voltage and total output current, main fuse temperature, and output current of each rectifier. The remote battery operates in the float or charge state, rectifier fault, DC output overvoltage and undervoltage, and fuse break. Hansa Diesel Small Generator Remote Control Rectifier for summer, start and shutdown.

4 Battery remote measurement total voltage, charge and discharge safety hour, battery terminal voltage, battery operating temperature, etc.

5Automatic diesel generators remotely measure three-phase voltage, three-phase current, output power, frequency (rotational speed), fuel oil level, cooling water level, lubricating oil pressure, starting battery voltage and so on. Remote working status (operation and shutdown), working mode (automatic and manual), automatic transfer switch status, low oil pressure, high water temperature, low fuel oil level, abnormal voltage, overcurrent, frequency (speed), overspeed, start failure , start battery low voltage status indication and abnormal alarm. Remote start or stop, emergency stop, load change, etc.

6 AC regulator remotely measures primary voltage and secondary voltage. Remote signaling regulators, mains direct-through, regulator failures, etc.

7 Hansa small diesel generator uninterruptible power supply (UPS) telemetry AC input voltage, DC voltage, standard battery terminal voltage, AC output voltage, current, frequency and so on. Remote signal power failure, rectifier failure, inverter failure, UPS power supply, mains power supply, and low battery voltage.

8 Local air conditioning equipment remotely measures the temperature of the equipment room, intake pressure and exhaust pressure. Remote working conditions, excessive temperature, low temperature, excessive humidity, low humidity, fan failure, compressor failure, humidifier failure, excessive exhaust pressure, low intake pressure, etc. Remote start and shutdown.

Related Reading:

Gasoline Generator: This section is Hanseatic

Imported gasoline generators: All gasoline/diesel machinery in this section are imported machinery.

Small Diesel Generators: All diesel generators in this column are 3-8KW diesel generators.

5KW Gasoline Generator: This column is all silent gasoline generators, home gasoline generators, digital gasoline generators.

Ultra-quiet diesel generator: All diesel generators in this column are silent generators 10-1000KW diesel generators.

Vibrating plate 夯 : This column is a two-way vibrating plate 夯, unidirectional vibrating plate 夯, asphalt dedicated plate 夯.