How to Use Electronic Dashboard for Inspection of Sprinklers

Most of the electronic dashboards on the sprinkler are controlled by a computer and also have a self-test function. As long as the instructions are given to them, the electronic controller of the sprinkler's electronic instrument panel will perform the next inspection of the system corresponding to its main display device. As long as there is a fault in one of the systems, the controller will use different warnings to inform the driver that there is a fault in the display system, and it also shows the location of the sprinkler fault code storage . In order to facilitate the inspection and maintenance of the vehicle when the fault code from the inside out, rightly pointed out the location of the fault. When the sprinkler's electronic dashboard fails, it should be checked immediately.

A quick detector can be used to inspect the fault location. The quick detector can emit and simulate a variety of sensor models, and can quickly detect the location of the sprinkler fault. When using the tester to input signals to the instrument panel, if the display of the instrument panel is normal, then it proves that the circuit or the sensor has failed. If the display is not capable of display, then the tester is directly connected to the relevant input socket on the electronic instrument panel. If the display is normal at this time, it proves that the connector and the sprinkler harness have appeared. Problem, or else it proves that the dashboard has failed.

The computer quick tester can be used for detection. The computer quick tester is a signal that can simulate the flow of fuel and the speed of the vehicle. The alarm signal from the tester also needs to be input from different locations. The operation of the detection harness, the sensor number computer, and the display device is not normal.

Mast Section

A Tower Crane is an inverted L-shaped structure that is capable of lifting several tons of weight to precarious heights.

The most striking feature of this crane is that it is self-building and can allow a building to be constructed adjacent to or even around it.

Tower crane mast section ( tower crane mast and tower crane basic mast ) is a steel structure with a normally square section, whose main mission is to provide the tower crane with sufficient height.

Normally it is formed by lattice modules that facilitate the transport of the crane. For assembly, these modules will be joined by screws, all of which will be connected to the projected height. Its shape and dimension vary according to the necessary characteristics of weight and height.

BQ also supplying other Steel Structure spare parts of tower crane like Basic Mast Section, Fixing Angle (or Reusable Fixing Angle), Anchorage Frame,Telescoping Cage Jacking Cage, Tower Crane Yoke, Hook and so on.



Basic Mast Section,Tower Crane Mast,Crane Mast Section,Tower Crane Mast Section,Tower Crane Basic Mast

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com