Phosphorus deposits of the type shown in Table 1, at home and abroad of phosphate rock beneficiation indicators in Table 2.
Jinping phosphate concentrator plant by the Beijing Nonferrous Metallurgy Design Research Institute in 1955, the design, the design capacity of 1,122,000 t / a, 1959 put into operation. In 1966, the ore volume was 1.157 million tons. In recent years, the ore volume was about 750,000 tons due to insufficient mining ore supply.
(1) Ore properties: The ore deposit is a marine sedimentary metamorphic phosphorite deposit, and the phosphate-bearing ore layer has industrial value such as Xishan, Dongshan and Taowan. The ore is divided into three types: fine-grained phosphorus rock, manganese- phosphorus ore and mica- phosphorus. Various types of mineral ore consists of: 1) fine-grained rock phosphate apatite, calcite, dolomite, followed by quartz, muscovite, biotite partial saw, garnet, pyrite, limonite, Magnetite, hematite, feldspar , aluminophosphate , strontium calcite, kaolin , dikeite, sericite and iron-manganese oxide, Dongshan mining area still contains chlorite and pyrolusite; 2) manganese phosphate layer Clear black and white strips, black is manganese, porous and porous, mineral composition is mainly apatite, pyrolusite, followed by muscovite, magnetite, hard manganese ore, dolomite, quartz, feldspar, sericite 3, mica phosphorus rock is generally cyan, weathered yellow-brown, hard, morphological development, mineral composition of apatite, muscovite, quartz, limonite, followed by hematite Occasionally there are biotite, etc. The multi-element analysis of each type of ore is shown in Table 3. The multi-element analysis of mixed ore is shown in Table 4.
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-briquetter.com