Large Power Water Ring Vacuum Pump for Papermaking Industry

Model NO.: 2SK-42
Ultimate Pressure: 33hpa 25torr
Motor Power: 75kw
Rotating Speed: 740rpm
Water Supply: 100L/Min
Inlet&Outlet Dimensions: 100mm
Weight: 2100kg
Certification: CE,ISO9001
Sea Port: Ningbo/Shanghai
Delivery Time: Based on Factory Production Schedule
Trademark: DVE
Transport Package: Neutral Wooden Case
Specification: CE Mark, Spare Parts Of High Level
Origin: Zhejiang, China
HS Code: 8414100090
Model NO.: 2SK-42
Ultimate Pressure: 33hpa 25torr
Motor Power: 75kw
Rotating Speed: 740rpm
Water Supply: 100L/Min
Inlet&Outlet Dimensions: 100mm
Weight: 2100kg
Certification: CE,ISO9001
Sea Port: Ningbo/Shanghai
Delivery Time: Based on Factory Production Schedule
Trademark: DVE
Transport Package: Neutral Wooden Case
Specification: CE Mark, Spare Parts Of High Level
Origin: Zhejiang, China
HS Code: 8414100090

SPECIFICATION

Products Name: Water Ring Vacuum Pump
Large Power Water Ring Vacuum Pump for Papermaking Industry
Large Power Water Ring Vacuum Pump for Papermaking Industry

PS: Detailed model refer to REAL PIECE pls.Large Power Water Ring Vacuum Pump for Papermaking Industry

WORKING THEORY

1. Series SK,2SK Water Ring Vacuum Pumps can be used to exhaust ordinary gases as well as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump made up of anti-corrosion material is selected, it can be used for exhausting corrosive gases too. 
 
   2SK series two-stage liquid ring vacuum pumps can work well like two sets of SK series water ring vacuum pump. Due to SK series vacuum pumps only reach the maximum vacuum of-700mmHg, to meet the high vacuum and the large pumping speed under high vacuum, China developed the 2SK series water ring vacuum pump in 80s in the 20th century. 
 
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher vacuum and better applicability. The different types of gases can be pumped with the selected suitable working media. Therefore, they can be applied in wider range.
 
3. The pumps run smoothly with low noise and consumption. The energy-saving is 30 percent comparing with the Water Jet and the Water VaporJet Pumps.
 
 
Large Power Water Ring Vacuum Pump for Papermaking Industry

Large Power Water Ring Vacuum Pump for Papermaking Industry

ADVANTAGE

1. Compared with SK water vacuum pump ,It gets high vacuum and pumping speed etc..
2. Simple structure and easy maintenance.
3. The mostly working medium is water and low maintenance costs.
4.The pump is widely use in many areas and suction water vapor,flammable, explosive and various gases contain a small amount of dust and liquid.
5. The pump can works in the harsh condition 

PARAMETER

Model Displacement
(m3/min)		 Ultimate Pressure Motor Power(kW) Rotary Speed(rpm) Water Supply(L/min)

Inlet&Outlet 

Dimensions
(mm)

Weight            

(kg)
hPa Torr
2SK-2B 2 40 30 5.5 1450 20 50 185
2YK-2B 6.6 5
2SK-3 3 40 30 7.5 1450 25 50 320
2YK-3 6.6 5
2SK-6B 6 33 25 11 1450 35 50 370
2YK-6B 6.6 5
2SK-12 12 33 25 22 980 70 80 850
2YK-12 6.6 5
2SK-25 25 33 25 55/45 980 60-110 100 926
2YK-25 6.6 5
2SK-30A 30 33 25 55 980 60-110 100 1300
2YK-25 6.6 5
2SK-42 42 33 25 75 740 100 100 2100
 

APPLICATION
It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.

CURVE

Large Power Water Ring Vacuum Pump for Papermaking Industry

Regular Selection for Water(Liquid)Ring Vacuum Pump
1,Based on the vacuum value
(1)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(2)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(3)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.

2,Working Media 
There are four principles to choose working media(i.e.ring liquids);
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction with the pumped gas;no corrosion to the pump; no pollution to the environment.
(4) Economy

      If the water is selected as the working medium, the best temperature of supply water should be lower than or equal to 15 °C; the highest one should not be higher than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the working media, the general supply temperature should not higher than 40°C and the working media temperature inside the pump chamber should not be higher than 60C, when the liquid with lower boiling point is selected as the working media under some special circumstances, the cooling unit must be equipped to cool down the working media in order to ensure that the max temperature is 30ºC-50ºC, lower than the boiling point. For the closed circulated system of working media, the liquid storage unit and cooler must be equipped, and the gas-liquid separator must be installed at outlet. The mechanical seal should be used for dynamic seal of the shaft.
 
3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the mechanical seal when the pump is used in no leak occasion.

4,Choose the material of the part that the gas passed:
(1) For the non anti-corrosion pump, the shaft is made of 45#steel or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed, should be made of stainless steel 304 and 306, or other material suitable for the respectively corrosive gas, or the parts should be put with anti-corrosion coating.
5, The motor should be selected based on pumping pressure.
If the pump is used for vacuuming while transferring gas, the pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages liquid ring compressor should be chosen and not the vacuum pump refitted. Tthe power of the equipped motor should be increased obviously. And the special gas-liquid separator and auto-drain unit should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum pump refitted as compressor. The power of the equipped motor should be increased properly.
6,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.

SPECIFICATION

Products Name: Water Ring Vacuum Pump
Large Power Water Ring Vacuum Pump for Papermaking Industry
Large Power Water Ring Vacuum Pump for Papermaking Industry

PS: Detailed model refer to REAL PIECE pls.Large Power Water Ring Vacuum Pump for Papermaking Industry

WORKING THEORY

1. Series SK,2SK Water Ring Vacuum Pumps can be used to exhaust ordinary gases as well as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump made up of anti-corrosion material is selected, it can be used for exhausting corrosive gases too. 
 
   2SK series two-stage liquid ring vacuum pumps can work well like two sets of SK series water ring vacuum pump. Due to SK series vacuum pumps only reach the maximum vacuum of-700mmHg, to meet the high vacuum and the large pumping speed under high vacuum, China developed the 2SK series water ring vacuum pump in 80s in the 20th century. 
 
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher vacuum and better applicability. The different types of gases can be pumped with the selected suitable working media. Therefore, they can be applied in wider range.
 
3. The pumps run smoothly with low noise and consumption. The energy-saving is 30 percent comparing with the Water Jet and the Water VaporJet Pumps.
 
 
Large Power Water Ring Vacuum Pump for Papermaking Industry

Large Power Water Ring Vacuum Pump for Papermaking Industry

ADVANTAGE

1. Compared with SK water vacuum pump ,It gets high vacuum and pumping speed etc..
2. Simple structure and easy maintenance.
3. The mostly working medium is water and low maintenance costs.
4.The pump is widely use in many areas and suction water vapor,flammable, explosive and various gases contain a small amount of dust and liquid.
5. The pump can works in the harsh condition 

PARAMETER

Model Displacement
(m3/min)		 Ultimate Pressure Motor Power(kW) Rotary Speed(rpm) Water Supply(L/min)

Inlet&Outlet 

Dimensions
(mm)

Weight            

(kg)
hPa Torr
2SK-2B 2 40 30 5.5 1450 20 50 185
2YK-2B 6.6 5
2SK-3 3 40 30 7.5 1450 25 50 320
2YK-3 6.6 5
2SK-6B 6 33 25 11 1450 35 50 370
2YK-6B 6.6 5
2SK-12 12 33 25 22 980 70 80 850
2YK-12 6.6 5
2SK-25 25 33 25 55/45 980 60-110 100 926
2YK-25 6.6 5
2SK-30A 30 33 25 55 980 60-110 100 1300
2YK-25 6.6 5
2SK-42 42 33 25 75 740 100 100 2100
 

APPLICATION
It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.

CURVE

Large Power Water Ring Vacuum Pump for Papermaking Industry

Regular Selection for Water(Liquid)Ring Vacuum Pump
1,Based on the vacuum value
(1)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(2)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(3)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.

2,Working Media 
There are four principles to choose working media(i.e.ring liquids);
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction with the pumped gas;no corrosion to the pump; no pollution to the environment.
(4) Economy

      If the water is selected as the working medium, the best temperature of supply water should be lower than or equal to 15 °C; the highest one should not be higher than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the working media, the general supply temperature should not higher than 40°C and the working media temperature inside the pump chamber should not be higher than 60C, when the liquid with lower boiling point is selected as the working media under some special circumstances, the cooling unit must be equipped to cool down the working media in order to ensure that the max temperature is 30ºC-50ºC, lower than the boiling point. For the closed circulated system of working media, the liquid storage unit and cooler must be equipped, and the gas-liquid separator must be installed at outlet. The mechanical seal should be used for dynamic seal of the shaft.
 
3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the mechanical seal when the pump is used in no leak occasion.

4,Choose the material of the part that the gas passed:
(1) For the non anti-corrosion pump, the shaft is made of 45#steel or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed, should be made of stainless steel 304 and 306, or other material suitable for the respectively corrosive gas, or the parts should be put with anti-corrosion coating.
5, The motor should be selected based on pumping pressure.
If the pump is used for vacuuming while transferring gas, the pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages liquid ring compressor should be chosen and not the vacuum pump refitted. Tthe power of the equipped motor should be increased obviously. And the special gas-liquid separator and auto-drain unit should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum pump refitted as compressor. The power of the equipped motor should be increased properly.
6,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.

Except the above vehicles, we also offer other brand vehicle Brake Master Cylinder, such as GMC, Citroen, Porsche and so on. Since we are brake parts factory, we are glad to assist you to manufacture it if you have samples or drawings. All of our brake Master Cylinder are made of cast iron or aluminum. Besides, brake master cylinder brake booster and Brake Proportioning Valve assembly are supplied. Just tell us your specific requirement, then we can recommend you suitable products.

Others Brake Master Cylinder

Brake Master Cylinder,Master Cylinder,Master Cylinder Cost,Car Brake Master Cylinder

Quzhou Hipsen Vehicle Parts Co., Ltd , http://www.hbs-parts.com