Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories

Trademark: Evergreen Maritime
Origin: Shandong, China

Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories
 

EVA Foam Fender with Thicken PU Skin

1.Construction

EVA Foam Fender with Thicken PU Skin
2.Specification
 

Specification Performance(at 60% pressure) Weight
Diameter Length Reaction(KN) Energy(KN.M) Body(kg) CTN(kg)
300 500 19 1.8 6  
400 800 40 7 17  
500 1000 48 9 33  
600 1000 58 12 48  
700 1500 133 26 96  
1000 1500 173 47 108 197
1000 2000 254 68 263 171
1200 2000 280 91 378 248
1350 2500 418 152 600 298
1500 2000 488 198 580 310
1500 3000 578 232 890 490
1700 3000 618 282 1140 510
2000 3500 845 454 1845 890
2000 4000 1005 540 2100 1000
2500 4000 1197 818 3297 1180
2500 5500 1666 1128 3866 1200
3000 5000 1810 1460 4878 2388
3000 6000 2295 1851 5849 2690
3300 6500 2528 2133 7668 2889
3500 6000 2777 2333 7698 3000


3.Application

EVA Foam Fender with Thicken PU Skin

4.Packing&Delivery

EVA Foam Fender with Thicken PU Skin
Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories
Marine Foam Filled Fenders / EVA Fenders/ Ship-Ship Protective Accessories

Edgebander Glue

Furniture edge sealing glue can be divided into three categories according to the different base materials:
EVA (ethylene-vinyl acetate copolymer resin) base material hot melt adhesive, this hot melt adhesive can be divided into two types with filler and without filler. Using EVA as the base material is the most common production technology for furniture edge sealing adhesives, and its main limitation is poor heat resistance. The ambient temperature of panel furniture sealed with EVA hot melt adhesive shall not be higher than 120°C;
POL YAMIDE (polyamide) based hot melt adhesive, this hot melt adhesive has good heat resistance and fast curing characteristics, the main disadvantage is that it is expensive.

HMPU (polyurethane) base material hot melt adhesive, it is a kind of hot melt adhesive with the best performance, and it is the guarantee of high quality sheet edge sealing. It is expensive and requires special usage.

The performance of furniture edge sealant
1. Viscosity of furniture edge sealant
The viscosity of furniture edge sealing glue does not directly reflect the performance of the glue. In general, the higher the viscosity of the furniture edge sealant, the better its initial tack strength, but the worse the coating performance. Low-viscosity hot melt adhesives have a smaller amount of glue and better wetting properties. Some hot melt adhesives with low viscosity and fast curing speed may also have high initial tack strength.
2. Density of furniture edge sealing glue
The density of furniture edge sealant is generally 0.95-1.6g/cm3, and its density depends on the amount of filler.
3. Softening point and use temperature of furniture edge sealing glue
The softening point is an indicator of the heat resistance of the furniture edge sealant. The higher the softening point, the less likely the furniture edge sealant will melt. At the same time, softening point is also an important aspect to measure the temperature resistance of panel furniture.
4. The opening time of the furniture edge banding glue and the feeding speed of the edge banding machine
Furniture edge sealant is widely used in the market because of its solvent-free, water-resistant, and environmental-friendly features.

The Edge Glue

Edgebander Glue,Edge Banding Glue,Pur Edgebanding Glue,Edge Banding Hot Melt Glue

GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com