Mining Long Shaft Vertical Column Sump Slurry Submerslbie Small Pump

Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump




Company Profile: 

Shijiazhuang An Pump machinery CO.,LTD established in 1986, as one of An pump Group' three branches companies in slurry pump, veritcal pump, veritcal slurry pump, submersible pump, submersible slurry pmp etc.



Product Presentation: Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 

Feature of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 
CANTILEVERED SHAFT
The standard BP pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.

HEAVY DUTY WET END 
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.

COLUMN AND DISCHARGE PIPES 
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.

VERSATILE DRIVE OPTIONS
BP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.

REMOVABLE STRAINERS
BP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.

"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.




Application of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump

The BP slurry pumps are mainly used for handing corrosive, coarse particles and high density slurries.

They are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal 
washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites.

For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, Dewatering screen pump, Pressure pump, Concentrate pump

Δ Performance parameters of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 
 Note: "M": Wear-resistant Alloy. "RU": Rubber

Material of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 



FAQ

A: What kind of company you are?
Q: ShijiazhuangAn Pump Machinery is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 


  Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump




Company Profile: 

Shijiazhuang An Pump machinery CO.,LTD established in 1986, as one of An pump Group' three branches companies in slurry pump, veritcal pump, veritcal slurry pump, submersible pump, submersible slurry pmp etc.



Product Presentation: Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 

Feature of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 
CANTILEVERED SHAFT
The standard BP pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.

HEAVY DUTY WET END 
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.

COLUMN AND DISCHARGE PIPES 
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.

VERSATILE DRIVE OPTIONS
BP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.

REMOVABLE STRAINERS
BP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.

"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.




Application of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump

The BP slurry pumps are mainly used for handing corrosive, coarse particles and high density slurries.

They are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, dewatering, water treatment, coal 
washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites.

For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, Dewatering screen pump, Pressure pump, Concentrate pump

Δ Performance parameters of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 
 Note: "M": Wear-resistant Alloy. "RU": Rubber

Material of Small Mining Centrifugal Long Shaft  Vertical Submerslbie Slurry Pump
 



FAQ

A: What kind of company you are?
Q: ShijiazhuangAn Pump Machinery is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 


 

----FOR NHR/NKR

Differential Gear Development,Tractor ,Forklift ,Dump Truck

Transit Parts,Brand Parts Co., Ltd. , http://www.nbtransitparts.com