Multi-Functional All-Digital Inverter Welding Machine

Model NO.: DT-2 Series
HS Code: 8515219000
Model NO.: DT-2 Series
HS Code: 8515219000
Main Features

Specially suitable for no-spatter welding of carbon steel wire and stainless steel wire

Support MMA welding, DC MAG welding, single-pulse MIG welding, and double-pulse MIG welding.

Soft-switch inverter technology, DSP all-digital control, LCD menu and function display, can be used with robot

with welding expert database inside, can save 30 sets of parameters

Automatic protection from over-current, over/under-voltage and over temperature

with all-closed grating feedback four-wheel double-driving wire feeder

Double-pulse MIG welding greatly decreased the technical requirements for welders and the labor intensity of welders. Every fish-scale fatten can form automatically and evenly and the size of fish-scale fatten can be controlled

Multi-Functional All-Digital Inverter Welding Machine
 
Content                        Model DSP-315 DSP-400 DSP-500
Function  model:
DSP-315DT-2		 Function  model:
DSP-400DT-2		 Function  model:
DSP500DT-2
Power 3-phase  380/415V  50/60HZ
Rated  input  current 18.6A 25.8A 35A
Rated  input  capacity 12.2KVA 17KVA 23KVA
Rated  welding  current/voltage 315A/32.6V 400A/34V 500A/39V
Welding  current 315A  60%DE 400A  60%DE 500A  60%DE
250A  100%DE 315A  100%DE 400A  100%DE
No-load  voltage(MAX) 65V 65V 73V
Adjust.   Range
of  welding  current.		 40-315A 40-400A 40-500A
Mixing  ratio  of  double  pulse 0-10HZ
Efficiency 85%
Power  Factor > 0.95
Pre-gas  sending  time 0-1S
Post-gas  sending  time 0-10S
Suitable  wire Φ 0.8-Φ 1.6mm  stainless  steel  wire  or  carbon  wire
Cooling  type  of  torch Water
Protection  gas 97.5%Ar2+2.5%CO2  or  98%Ar2+2%O2  for  carbon  steel  wire  or  stainless  steel  wire 
Main Features

Specially suitable for no-spatter welding of carbon steel wire and stainless steel wire

Support MMA welding, DC MAG welding, single-pulse MIG welding, and double-pulse MIG welding.

Soft-switch inverter technology, DSP all-digital control, LCD menu and function display, can be used with robot

with welding expert database inside, can save 30 sets of parameters

Automatic protection from over-current, over/under-voltage and over temperature

with all-closed grating feedback four-wheel double-driving wire feeder

Double-pulse MIG welding greatly decreased the technical requirements for welders and the labor intensity of welders. Every fish-scale fatten can form automatically and evenly and the size of fish-scale fatten can be controlled

Multi-Functional All-Digital Inverter Welding Machine
 
Content                        Model DSP-315 DSP-400 DSP-500
Function  model:
DSP-315DT-2		 Function  model:
DSP-400DT-2		 Function  model:
DSP500DT-2
Power 3-phase  380/415V  50/60HZ
Rated  input  current 18.6A 25.8A 35A
Rated  input  capacity 12.2KVA 17KVA 23KVA
Rated  welding  current/voltage 315A/32.6V 400A/34V 500A/39V
Welding  current 315A  60%DE 400A  60%DE 500A  60%DE
250A  100%DE 315A  100%DE 400A  100%DE
No-load  voltage(MAX) 65V 65V 73V
Adjust.   Range
of  welding  current.		 40-315A 40-400A 40-500A
Mixing  ratio  of  double  pulse 0-10HZ
Efficiency 85%
Power  Factor > 0.95
Pre-gas  sending  time 0-1S
Post-gas  sending  time 0-10S
Suitable  wire Φ 0.8-Φ 1.6mm  stainless  steel  wire  or  carbon  wire
Cooling  type  of  torch Water
Protection  gas 97.5%Ar2+2.5%CO2  or  98%Ar2+2%O2  for  carbon  steel  wire  or  stainless  steel  wire 

Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories are less expensive than other manufacturing processes.

Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories have good thermal properties and are used in applications where high temperature power supplies and bulbs are used. In former years, lighting housings were welded together, which was labor intensive, costly, and had limitations on the shapes available.



Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories can be many shapes and sizes, used in many lighting applications, and can be manufactured net shape. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight. Aluminum lighting fixtures can be produced in quantities of a few hundred to thousands of aluminum lighting fixtures each day. Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories are electrically conductive and can be grounded.

Aluminum Die Casting Lighting Parts

Aluminum Die Casting of Lighting Parts, Aluminum Die Casting of Lamp parts, Aluminum Castings of LED, Aluminum Casting of CNC Machining

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com