*Adopting no pole adjustment,convenient to use.
*Portable,economical,durable and reliable.
*Stable arc,deep welding pool,esthetic shaping of welding seam.
*Auto protection of over current,over voltage.
*Can continuous work,stable performance,automatic compensation for voltage fluctuation.
*Suitable for decoration and hardware industry.
| Model: | ARC-200 |
| Input power Voltage Frequency(V,Hz): | AC220(single phase)±15%,50/60 |
| Rated input power capacity(KVA) : | 7 |
| No-load voltage(v): | 62 |
| Output current range.(A):    | 20-200 |
| Rated output voltage(V): | 28 |
| Duty cycle (%):(25ºC) | 60 |
| No-load loss(w):        | 40 |
| Efficiency(%): | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 9 |
| Overall dimension(mm): | 365×138×238 |
| Case protection degree: | IP21S |
| Suitable diameter of rod(mm):   | 1.6-4.0 |
 Product Characteristics:
*Adopting no pole adjustment,convenient to use.
*Portable,economical,durable and reliable.
*Stable arc,deep welding pool,esthetic shaping of welding seam.
*Auto protection of over current,over voltage.
*Can continuous work,stable performance,automatic compensation for voltage fluctuation.
*Suitable for decoration and hardware industry.
| Model: | ARC-200 |
| Input power Voltage Frequency(V,Hz): | AC220(single phase)±15%,50/60 |
| Rated input power capacity(KVA) : | 7 |
| No-load voltage(v): | 62 |
| Output current range.(A):    | 20-200 |
| Rated output voltage(V): | 28 |
| Duty cycle (%):(25ºC) | 60 |
| No-load loss(w):        | 40 |
| Efficiency(%): | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 9 |
| Overall dimension(mm): | 365×138×238 |
| Case protection degree: | IP21S |
| Suitable diameter of rod(mm):   | 1.6-4.0 |
Â
The device has the following characteristics:
1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.
2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.
3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.
4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.
5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment
6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.
Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.
Kiln For Gold Extraction,Gold Extraction Equipment,Inactivated Carbon Regenerator,Carbon Activation Furnace
Changchun Gold Research Institute Co.LTD , https://www.changchungoldresearch.com