Portable Pneumatic DCP with 10 Kg/20 Kg Drop-Weight Hammer

Model NO.: 16-T0012/P

HS Code: 90248000

Model NO.: 16-T0012/P

HS Code: 90248000

Pneumatic Dynamic Cone Penetrometer with 10kg and an additional 20kg hammer DPL DPM

Dynamic penetrometer light DPLÂ with pneumatic driveÂ is most commonly used deviceÂ for soil compaction testingÂ up to 10 meters depth.Â

Compact and very light compressor (only 15,6 kg) with a Honda Engine is mounted on solid frame. Construction of the device
allows comfortable usage, all accessories are mounted on a special holder and therefore it is very easy to transport on the
site of survey. Number of strokes can be adjusted manually. The ball valve can stop the work of the penetrometer at any time
without the need of shutting the compressor down. The penetrometer can be supplied with standard extension rods
(diameter 22 mm, threaded nipple M16) and survey cone.

Specifications

Â SPECIFICATION OF THE PENETROMETER:

Weight of the drop-weight: 10 kg
Total weight: 16 kg
Drop height: 50 cm
The chrome guide
Flexible number of blows
(max 50 blows per min)
Plug for the compressor

SPECIFICATION OF THE COMPRESSOR:
Honda 4-cylinder diesel engine
Rotary compressor
Regulated pressure
Frame on the rubber brackets
Total weight: 15,6 kg
Dimensions (L / W / H):
45 cm x 31,5 cm x 47 cm
Noise level: 94 dB(A) at 7m

Packaging & Shipping

ACCESORIES INCLUDED:
Connecting hose for the compressor,
2 m length with the coupler
Bolts for the head
Bracket swiveling for the head
Threaded nipple for the rods M16
Transport tube for the probe
Special oil for the probe guide
lubrication

Â Pneumatic Dynamic Cone Penetrometer with 10kg and an additional 20kg hammer DPL DPM

Dynamic penetrometer light DPLÂ with pneumatic driveÂ is most commonly used deviceÂ for soil compaction testingÂ up to 10 meters depth.Â

Compact and very light compressor (only 15,6 kg) with a Honda engine is mounted on solid frame. Construction of the device
allows comfortable usage, all accessories are mounted on a special holder and therefore it is very easy to transport on the
site of survey. Number of strokes can be adjusted manually. The ball valve can stop the work of the penetrometer at any time
without the need of shutting the compressor down. The penetrometer can be supplied with standard extension rods
(diameter 22 mm, threaded nipple M16) and survey cone.

Specifications

Â SPECIFICATION OF THE PENETROMETER:

Weight of the drop-weight: 10 kg
Total weight: 16 kg
Drop height: 50 cm
The chrome guide
Flexible number of blows
(max 50 blows per min)
Plug for the compressor

Packaging & Shipping

Power Group-Generator, Engine,Diesel Generator,Wind Generator