In 2015, in order to promote the development of small-displacement vehicles, the State Council reduced the vehicle purchase tax by halving the purchase of passenger cars of 1.6 liters and below. The tax rate was reduced from 10% to 5%. After the launch of the policy, sales of small-displacement models increased rapidly. However, at the end of last year, the Ministry of Finance issued a new policy on small-displacement automobile purchase tax. From January 1, 2017 to December 31, 2017, passenger vehicles with a displacement of 1.6 liters or less were charged at a rate of 7.5%. tax.
In response to this, some car companies have introduced purchase tax subsidies to reduce the impact of the new purchase tax policy on new car sales. Among them, some car companies' subsidy policies benefit all models, while others are only for some models, and the subsidy policy deadlines of various car companies are different.
　　 The deadline for the offer is expected to be Beijing Auto
Models: Sic Bo X25, Sic Bo X35, Sic Bo X55, Beijing (BJ) 20
Time: From January 1, 2017 (the deadline is expected)
Purchase the Sic Bo X25, Sic Bo X35, Sic Bo X55 and BJ20 models within the specified time, you can enjoy the purchase tax halved, and the national purchase tax increase will be borne by Beijing Auto.
Beiqi Weiwang
Model: Weiwang M50F
Time: From January 16, 2017 (the deadline is expected)
Starting from January 16, 2017, the purchase of Beiqi Weiwang M50F all models can still enjoy the purchase tax halving policy, and the national purchase tax increase will be borne by BAIC Weiwang.
Guangqi Chuanqi
Model: Chuanqi GA3S, GS4, GA6 1.6L and below displacement models
Time: From January 1, 2017 (the deadline is expected)
From January 1, 2017, the above models will be purchased, and the 2.5% purchase tax subsidy will continue to be enjoyed. The national purchase tax will be raised by the Guangzhou Automobile.
　　 a Toyota
Models: Corolla, Vios
Time: From January 1, 2017 (the deadline is expected)
Customers who purchase Corolla and Vios from January 1, 2017 will enjoy a halving of the purchase tax, and the national purchase tax will be raised by FAW Toyota.
　 SAIC Skoda
Model: The displacement is 1.6L and below
Time: From January 6, 2017 (the deadline is expected)
From January 6, 2017, the purchase of Speedy 1.4T, Yeti 1.6L/1.4T, Octavia, Hao Rui, Qiang, Jing Rui and other models with 1.6L and below can continue to enjoy the purchase tax halving. The increase in the national purchase tax is borne by SAIC Skoda.
Offer as of February 28
　 Guangzhou Automobile Toyota
Model: Lei Ling 1.2T, to dazzle
Time: January 1st - February 28th, 2017 (for customers who booked the car within the time limit and delivered the car before February 28th)
Customers who have ordered the Ralink 1.2T or the Hyun model from January 1st to February 28th, 2017 and will deliver the car before February 28th, can continue to enjoy the purchase tax reduction of half, the national purchase tax increase, by Guangzhou Automobile Toyota bears.
Chery
Models: Tiggo 7, Tiggo 5, Tiggo 3, Tiggo 3X, Arrizo 5, Arrizo 7 and other designated models
Time: January 1st - February 28th, 2017
Chery has introduced a purchase tax subsidy policy for some of its models. During the period from January 1 to February 28, 2017, it purchased the designated models such as Tiggo 7, Tiggo 5, Tiggo 3, Tiggo 3X, Arrizo 5, and Arrizo 7. Customers can still enjoy a halving of the purchase tax, and the national purchase tax is raised by Chery.
Kaiyi
Model: All models of Kaiyi
Time: January 1st - February 28th, 2017
Kaiyi Motor has introduced a purchase tax subsidy policy for all its models. If you purchase any of Kaiyi's models, you can continue to enjoy the purchase tax reduction of half, and the national purchase tax increase will be borne by Kaiyi.
Land wind
Model: Landwind X5, X7
Time: January 1st - February 28th, 2017
Lufeng Motor has introduced a purchase tax subsidy policy for some of its models. Anyone who purchases the Landwind X5 and X7 models from January 1st to February 2017 will be entitled to a halving of the purchase tax, and the national purchase tax will be raised by the land wind.
Offer as of April 30
　 SAIC Roewe
Model: Roewe RX5
Time: Offer as of April 30 (this offer is for the 30T model on April 30, 2017)
It is understood that users who order the Roewe RX5 20T (1.5T) before December 31, 2016, if they pick up the car from January 1 to April 30, 2017, they can enjoy the purchase tax halved (national subsidy 2.5) %, factory subsidy 2.5%); for Roewe RX5 30T (2.0T) models, all users who pick up the car before April 30, 2017 will continue to enjoy the purchase tax subsidy of 7,000 yuan.
All Servo Continuous Motion Side Sealer
SM-5030LH adopts [down-blowing system" structure, more efficient hot air circulation,air volume controlled by frequency inverter(VFD). Conveying speed adjustable by a frequency inveter. The top cover of the tunnel openable, and easy cleaning and maintenance. A visible window for the whole shrink process. In-feed powered belt conveyor and collected free roller conveyor as options. Easy operation, high cost-effective prominently feature SM-5030LX.
Simple customized modification as addtional restriction & press device as option. Applicable for single and combined package like CD, DVD, Cosmetic. Electronics, Printing boxes, Photo frame, Aluminum,Books, Magazine Wooden products.
All Servo Continuous Motion Side Sealer has continuous motion side sealer i.e. [Chasing knife" design has its incomparable edges over other normal side sealers. With this model customers can enjoy top efficiency.and prefect sealing line. Cross sealing motion in continuous mode with Conveyor/product synchronously driven by servo-motors. A prime choice to pack photo frame, books, magazine, electronic products and likes.
Servo motor action performs stable, reliable, continuous packaging process in high speed running, smooth transportion of product on the conveyors without product derail or fall-down.
Six servo motors,respectively controlling six procedures in a synchronous way, that is infeeding,transition,outfeeding,cutting , film releasing,and winding..
Self-adaption feeding system automatically adjusts according to the interval of product feeding.
Automatic Sealing And Shrinking Series System stands by automatically when in manual feeding or vacant feeding, and returns to normal working status when feeding recovers normally.
Advanced HMI, all setting & data storage compacted in HMI, automatic error detection and easy trouble-shooting.
Cross sealing behind side sealing saves 50% of waste film compared with traditional design.
Extra logo location/position function for printed pattern film as option. Easy adaptation to the customized production line.
All Servo Continuous Motion Side Sealer,All-Servo Continuous Motion Side Sealer,All Servo Continuous Motion Side Sealers,All-Servo Continuous Motion Side Sealers
SUZHOU SHENGBAIWEI PACKAGING EQUIPMENT CO.,LTD , https://www.sbwpack.com