Stainless Steel Water Pipe Making Machine

Model NO.: R2S-400-M
Color: According to Customer′s Request
Rate of Production: 12-20 PCS/Min
Machining Diameter Tolerance: +/-0.5mm
Air Pipe Diameter: 10mm
Time of Change Mould: Less Than 10 Minutes (One Worker Operate)
Feeding Plate Location Set: Yes
Working Temperature: -5 & +65 Degree Centigrade
Delivery Time: 25 Working Days After Advance Payment
Trademark: FJC
Transport Package: Wooden Case with Soft Film Layer
Specification: 400
Origin: China
HS Code: 8462219000


Stainless Steel Water Pipe Making Machine
 
Brief Introduction:
Widely used for rolling in the small sizes of the motor housing, roll diameter ¢25mm~¢80mm, thickness 0.3mm~2.5mm, contrast it with punch have the following advantage:
No noise, no scratch, high speed rolling, low energy consumption, roller replacement is simple, low roller cost, customers less investment, multi-position and working same time, high efficiency and easy operation.
Stainless Steel Water Pipe Making Machine

Rolling Samples:
Stainless Steel Water Pipe Making Machine Stainless Steel Water Pipe Making Machine

Advantage:
* Easy operation(manumotive/automatic/emergency-stop and etc), only need one worker.
* Equipment using a molding technology, so rolling and high production efficiency and mass production could be achieved.
* Get the high precision roundness, can get a very good flatness on the both ends etc.

Could be customized according to your requirements.
 
Main Technical Data:
Rolling Material Carbon/Stainless Steel etc. Diameter Tolerance ±0.5mm
Min Rolling Diameter ¢25mm Seam Width 5mm~10mm
Machining Effective Length 50mm~400mm Axial Malposition Tolerance ±0.5mm
Plate Thickness Range 0.3mm~2.5mm    

Machine Details:
Stainless Steel Water Pipe Making Machine
Workshop:
Stainless Steel Water Pipe Making Machine

 
If you are interested in our machine, please contact us for more information, welcome to contact us at any time, we will reply you as soon as possible!
 
 

Wall Mounted Fan Coil 

Air flow: 340m3/h-1360m3/h, Cooling capacity: 1808W-7210W


Characteristics of Water chilled type Fan Coil.

1.Coil: high effi ciency heat transfer performance.

2.Casing: reliable structure and elegant design.

3.Drain pan: special design for no leakage.

4.Motor: high effi ciency and low power consumption.

5.Fans: low acoustic level.

6.Controller: Remote contoller with facile and comfortable

7.Installed on the wall.

8.Maintenance: fan coils and filters shall be cleaned regularly by blowing with compressed air in opposite direction of airflow

Wall Mounted Fan Coil

Wall Mounted Fan Coil

Wall Mounted Fan Coil,Wall Mounted Fan Coil Unit,Water Wall Mounted Fan Coil,Wall Mounted Freestanding Fan Coil

Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com