The artificial climate chamber belongs to large-scale environmental test equipment, which not only has high cost, but also has high technical requirements. Therefore, the construction of artificial climate chamber must be considered from many aspects and choose reliable suppliers. Although some suppliers have low quotations, many technologies are not available during the construction process. Therefore, it is difficult to meet the requirements of subsequent manual experiments. It not only saves money, but also delays the accuracy of scientific research. It can be said that it is worth the loss. . Therefore , the construction of artificial climate chambers must be cautious, and we can focus on these three elements.
1. Temperature range. Because the artificial climate chamber will carry a light function, it will of course be divided into two sections when looking at the temperature. If the factory directly reports a temperature range to you, then we must carefully consider it. Generally, when the light is turned on, The temperature range is smaller than when the light is not on, for the simple reason that the heat generated by the light causes the temperature to rise. Generally, the temperature range of illumination is: 10-50 ° C, and the temperature range of no illumination is: 4-50 ° C.
2. Humidity range. Humidity is also the biggest difference between the light incubator and the artificial climate chamber. The light incubator is usually without humidity control, only temperature and light control, and the artificial climate chamber is controlled by humidity, so we can see if our experimental objects are specific. If there is control requirement for humidity, it can be determined whether the light incubator or the artificial climate chamber is purchased. The humidity range of the general artificial climate chamber is controlled at 50-90% RH.
3. Light intensity. The factors affecting the light intensity are: the way of illumination and the number of lamps. Generally speaking, the largest one has 0-30000LX, and there are some smaller ranges. When we choose, we mainly choose according to our own experimental requirements, and it is not The bigger the range, the better.
In fact, when research institutes, universities or related companies purchase artificial climate chambers, there is a relatively simple way to choose cooperation units. That is to try to choose large companies with rich experience, strong technical strength, many successful cases and good reputation. It is not only possible to consider the problem from the single factor of quotation, because such enterprises, such as Top Yunong, have the skills, experience, strength, and after-sales service, and can better understand the needs of users. Compared with the time and cost lost by cooperation with informal enterprises, cooperation with such enterprises will be more assured, and the quality of artificial climate chamber construction can be guaranteed to meet the high requirements of artificial climate experiments, and the actual cost is actually lower.
Clutch Cover, Clutch Disc assembly, clutch cover assembly, Clutch Kit, clutch kit with flywheel, clutch kit with slave cylinder, clutch kit for automotive, light and heavy vehicles.
Clutch kit usually comes with a clutch disc and a clutch pressure plate also called clutch cover, A flywheel, alignment tool, release bearing, pilot bearing/bushing, and spline lubricant may also be included.
Transmission Parts,Engine And Transmission,Automatic Transmission Parts,Engine And Transmission Mounts
Wenzhou Huaming Automotive Components Co.,ltd. , https://www.dqz-duchiez.com