When it comes to the maintenance of cars, many owners think of engines and tires. The small wheels let us completely ignore them, but we have to know whether the quality of the wheels is related to the quality of the car's tires and thus our lives. , so to say that the small wheels are also needed for our maintenance, then if there is any damage due to improper maintenance of our wheels, how can we fix them? The following editor will introduce it to everyone.
Tips for daily maintenance of tires:
1, when the tire temperature is high, it should allow natural cooling before cleaning, do not use cold water to clean; otherwise, will cause damage to the aluminum alloy hub, and even make the brake disc deformation and affect the braking effect. In addition, cleaning the aluminum Taiwan gold hub with a detergent at a high temperature will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.
2, when the tire is stained with hard to remove asphalt, if the general cleaning agent does not help, use a brush to try to clear, but do not use a hard brush, especially the iron brush, so as not to damage the hub surface. Experts have introduced a recipe for removing tar: The use of medicinal “active oils†for rubbing can provide unexpected results. The owners may wish to give it a try.
Slight scratches can be repaired on their own:
The first step: clean the hub. We can use paint thinners to wipe around the wounds and remove the dirt. It is very difficult to remove dirt from the deepest part of the scratch. At this time, it can be completely cleaned with a toothpick. When cleaning, it is best to carefully apply adhesive tape around the scratches in order to prevent accidental painting of unrelated parts.
The second step: the owner puts up the brush nib, applies a finishing lacquer to the hub where it is damaged, and then paints a little to make it easier for the owner to observe.
Step 3: After the car is fully dry, the car paint is applied with soapy water to make the surface smooth. Then use the mixture to wipe out the light, and then wax it again.
Step 4: If the owner finds that there is a deep scar on the hub, be sure to observe whether the metal surface is exposed. If the metal surface cannot be seen, it will not rust. You can concentrate on applying the finish paint. Use a pen tip to point it up little by little and wait for the paint to dry completely. If you find exposed metal, it is best to replace it.
Aluminium Train Body And Interior
Aluminium Train Body,Aluminium Train Interior,Slot Aluminum Extrusions,Aluminium Corrugated Sheet
KAM KIU ALUMINIUM GROUP , https://www.taishankamkiu.com