The "Three Guarantees for Cars", which made people wait for a long time but had never had a hard time, had a "fetal movement" on the last day of 2012. On the same day, the AQSIQ National Standardization Management Committee asked the community for opinions on the scope of the main parts and the three packs warranty (Exposure Draft) of the “Three-Packs of Household Vehicles Products†(hereinafter referred to as the “Draft for Soliciting Opinionsâ€) and solicited opinions in 2013. Feedback will be given before January 31st of the year.
This matter is not interpreted by the authority of the industry. People also all know that the introduction of the “Draft for Soliciting Opinions†means that the “three guarantees†policy that has been pending for a long time has already been put on the agenda. It is not far from the final announcement. For consumers, this can be considered a good New Year gift, although the gift is still virtual, after all, there has been a bit of hope.
To be fair, some of the explicit contents of the Exposure Draft are still very exciting. For example, "automobile products from the seller within 60 days from the date of purchase of the invoice or within 3000 kilometers, whichever occurs first, and the main parts of the engine and transmission have quality problems, consumers can choose to replace the engine for free, In the three-pack validity period, after the engine or transmission is replaced twice in total, or the same main parts of the engine and transmission are not replaced after two cumulative replacements due to quality problems (the assembly and replacement of major parts) If the consumer chooses to replace or return, the seller shall be responsible for replacement or return."
For another example, "In the period of validity of automotive products, the same main parts of the steering system, brake system, suspension system, front/rear axle, and vehicle body cannot be used normally after two cumulative replacements due to quality problems. If the seller chooses to replace or return the product, the seller shall be responsible for the replacement or return of the product; and if the consumable parts of the household automotive product have quality problems during the quality assurance period, the consumer may also choose to replace the easily-worn component for free.
As the industry analysts have analyzed, these regulations are operable and more reasonable for consumers. If they are approved for implementation, consumer rights can be better protected, and they can also promote the development of the automotive industry. .
However, people still have to worry about it. All along, the game between consumers and manufacturers is in a weak position, and the identification of product quality issues is still difficult. Shen Jinjun, executive vice president of the China Automobile Dealers Association, believes that the possibility of the introduction of the "car three packs" policy in 2013 is very high. However, the most important thing depends on how the policy is implemented. At present, the number of third party accreditation bodies is relatively small. At the same time, consumption How to identify and obtain evidence in the process of maintaining the quality of automobiles is still a difficult problem.
However, there are also some expert-level people who put forward the opposite opinion. They think that whether they have quality problems are originally technical matters. In addition to distinguishing the responsibility, the quality inspection department should entrust professional technical units or individuals to do the identification. I'm worried about appraisal issues or worry about people.
Is this worry really worrying people? Perhaps, there are some such ingredients, but people's concerns are not entirely unreasonable. Everyone knows that there are tens of thousands of parts in a car, among which there are five or six hundred kinds of wearing parts. No matter which part has a problem, it is caused by improper use of the car owner, or the quality of the car itself. What kind of problem is in line with the change of car? The standard, the standard of returning cars, and the cost of expensive identification should be borne by everyone. Many problems require a clear statement beforehand to ensure the implementation and implementation of the Three Guarantees policy, so as to truly protect the interests of consumers. And in the absence of a clear answer to the above questions, how can people's fears be simply treated as "deaf people?"
In addition, after the introduction and implementation of the future Three Guarantees policy, the quality appraisal of automotive products will be normalized. Of course, we are more willing to believe that appraisers can become fair and unselfish "black-faced Baogong", but if consumers are concerned about the quality of products at that time. There is no talk with the manufacturer. The delegated professional and technical unit or individual speaks for whom, and whether the appraiser's qualification is sufficient to convince the public is now unknown. With the facts still uncertain, do people worry that it will not be possible?
Obviously, the phrase “deaf people worry about heaven and earth†is to impose a label of ignorance on consumers who are worried. This kind of hard-headed gesture that speaks loud and hard on language rights is itself unfair, and this will only make people worry. Deepened. It is precisely because of this that we hope that when officially launching the “Three Guarantees†policy, the government can effectively solve these problems at the system design level, eliminate people’s concerns, and make it truly play a fair role in safeguarding the interests of both consumers and factories. The "accelerator" in the real sense of the development of the automotive industry and the automotive market.
Main features:
1. The drilling machine has high input power, high output torque and strong drilling capacity.
2. The output speed range of the drilling machine is wide, which is suitable for both engineering geological investigation and diamond core drilling.
3. The drilling machine is equipped with an open box rotator for easy operation of the orifice.
4. The utility model has an oil pressure feeding mechanism and a ball clamp type clamping mechanism at the upper end of the vertical shaft, which can improve the drilling efficiency and reduce the labor intensity of the workers.
5. The drilling rig is equipped with active drill pipe, which can realize non-stop reversing, with high efficiency, safety and reliability.
6. The drilling rig adopts the double plate normally closed friction clutch, which is flexible in opening and closing and convenient in operation and adjustment.
7. The gear box of the drilling rig adopts the structure of automobile gear box, with single handlebar speed change and interlock mechanism, which is convenient for operation.
8. The drilling machine is separated from the water pump, and the pump and the drilling machine are separately equipped with power, which can improve the output torque of the drilling machine, especially when entering the deep hole for drilling, there will be no contradiction in the use of the water pump due to the decrease of power, so as to avoid accidents in the hole.
9. The drilling rig is compact in structure, small in volume, light in weight, and the largest part is less than 100kg, which is convenient for disassembly and handling, and suitable for working in hills or mountains.
Core Drilling Machine,Core Bit,Core Hole Drill,Core Bit Set
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com