Woman puts five steel needles into the body to kill her husband

The woman put five steel needles into the body to suffocate her husband not to derail diesel generator | diesel generator price / 2013-01-08

Concerned that her husband has a third party outside, Zhong Wei in Huangpu District of Guangzhou will put five steel needles into the body, hoping to wake up her husband in this way. Since the steel needles were tied around the critical parts such as the carotid artery and heart, on the 2nd, the Guangdong Provincial People's Hospital eight departments jointly worked together and finally took out the steel needles for more than five hours.
On December 31, 2012, the Emergency Department of the Provincial People's Hospital received a patient from Huangpu District of Guangzhou. The family members said that she had brought her to a “fall injury”. "At that time, I saw Miss Zhong's neck with scars, like a blunt knife cut; there was also congestion on the nose and forehead. It was like a touch." Zhao Chengli, deputy chief physician of orthopedics at the hospital, judged that the patient may have been injured. my own.
"She has a dark eye and a very bad mood. When a stranger approaches, she shakes all over the body and does not cooperate with the examination." Zhao Chengli said: The X-ray film shows that there are five needles in her body and as many as a dozen of the body surface are Acupuncture marks. According to his family members, he had seen Zhong Wei pin himself.
From the X-ray film point of view, there are five steel needles in the body of Zhong Kui, one near the carotid artery and four near the heart. "The body foreign body is more common in scattered bullet wounds, or electric drill flying debris, their own needle into the body is still very rare!" Thoracic surgeon attending physician Xie Liang said.
Why is she so self-injured? Zhong Kui was emotionally moved and no one could communicate with him. The doctor suspects that she may have a mental illness, but her husband reports that she only had poor personality and no history of mental illness. Diagnosed by a psychiatrist, the results showed that the patient was in an illusion state and could recognize the person, but could not distinguish the position; there was no obvious schizophrenia, and it was assumed that the emotional agitation should be related to the foreign body in the body.
A family member revealed that Zhong Kui was always worried that her husband had a third party outside, and she watched her husband with self-mutilation.
As the steel needle is very thin, it is necessary to cut the skin and look for it, but also to prevent secondary injury. The eight departments of the Guangdong Provincial People's Hospital joined forces and finally took out the steel needle for more than five hours.
Next:Urban Survivors: Always Ready to Deal with Danger
Previous: Lankao Fire Tracker: Outcast Settled in Welfare Home Injured Child Has Not Escaped

CJ traditional chinese medicine ultrafine jet mill

This machine is a kind of horizontal spindle reflective crusher, can complete the fine crushing and particle separation at the same time two processing procedures, mill is composed of dynamic plate and ring gear, through special shape plate of high-speed rotation, the material particles in the moving plate and between the stationary ring gear repeatedly squeezed, collision, shear, so as to achieve, by the quantitative feeding system conveying to the crushing cavity, The material is impacted and cut between the rotor and the stator of the gear lining at high speed. The crushed material enters the grading area driven by the air flow. The qualified material is collected by the cyclone and dust collector, and the unqualified material is returned to the crushing area for crushing.

1. Compact and reasonable structure, small size, low energy consumption, high efficiency, stable speed, low noise, reliable sealing, no dust pollution, simple installation, easy to dismantle and repair, easy to replace damaged parts;

2. The equipment adopts the specialty of domestic and foreign dry mechanical crusher, according to the need to use large air volume into the cavity or water jacket cooling, in order to reduce the crushing heat, to prevent the shortcomings of material particles sticking to the wall, sticking to the crushing surface;

3. Crushing and grading machine, can meet the fineness requirements of the material timely distribution out, to avoid over crushing, material particle size distribution is narrow;

4. Suitable for processing a variety of materials in various industries, without stopping, it can adjust the strength arbitrarily. Product particle size uniform, fineness up to 10-5um;

5. This machine is widely used, suitable for Mohs hardness less than 5, water content less than 10% of dry materials can be crushed by this machine;

6. For the agglomerates, it has a good function of breaking and dispersing, and has the function of automatically checking the objects that are not easy to crush.



CJ Traditional Chinese Medicine Ultrafine Jet Mill,Traditional Chinese Medicine Ultrafine Crusher,Dry Herbal Ultrafine And Nano Super Micro Mill,Hermoplastic, Fibrous Materials, Chemical Industry Micro Sifter

Shandong Jing Xin Powder Equipment Technology Co., Ltd. , https://www.jxpowder.com