Cargo lift with full mesh is equipped with the safety device of the traditional traction elevator, and is also equipped with: overflow valve: it can prevent the system pressure from being too high during the upward movement; emergency manual valve: in case of power failure, it can make the car descend to the nearest floor position to open the door; manual pump: in case of system failure, it can operate the manual pump to pump out high-pressure oil to make the car rise to the nearest floor position; Pipeline rupture valve: when the hydraulic system pipeline breaks and the car stalls and descends, it can automatically cut off the oil circuit and stop the descent. Oil temperature protection of oil tank: when the oil temperature in the oil tank exceeds the standard setting value, the oil temperature protection device generates a signal to suspend the use of the elevator. When the oil temperature drops, the elevator can be started.
Low failure rate: due to the use of advanced hydraulic system and good control mode, the failure rate of elevator operation can be minimized. Low power consumption: when the hydraulic elevator goes down, it is driven by the pressure generated by its own weight, which greatly saves energy.
It only needs to dig a pit of more than ten centimeters to ensure the convenience of goods in and out, and facilitate the installation and use of equipment.
Hydraulic cylinder, special heavy chain, steel wire rope and multi-slave protection ensure the safety of equipment operation and use.
Hydraulic cylinder, special heavy chain, steel wire rope and multi-slave protection ensure the safety of equipment operation and use.
It can directly adopt slope treatment without pit, which greatly facilitates the installation and use of equipment.
Hydraulic Cargo Lift,Cargo Lifts Elevator,Hydraulic Vertical Cargo Lift,Vertical Cargo Lift System
zhongcan machinery Co.,Ltd , https://www.zclift.com