14 new national standards for valves to declare the recommended project is completed

National Valve Standardization Technical Committee submitted to the State Standardization Administration of the national standards and draft proposals for the formulation of standards ended recently, which contains the valve 14 new national standards to declare the recommended project. These projects are mainly flexible sealing gate valve, pilot-operated safety valve, explosion-proof valve electric device, emergency shut-off valve for liquefied petroleum equipment, steel relief valve for petroleum and petrochemical equipment. Most drafting units are from the valve of the first-line manufacturing enterprises, including: Beijing Valve Plant Co., Ltd., Hefei General Machinery Research Institute, Suzhou Su Valve, Shanghai Zheng Feng Valve, Shanghai Huatong Valve, Kunshan Star Valve Co., Ltd. , Ningbo Amico, Tianjin Bailey two links, Yangzhou power equipment repair factory.

Electronics Production Machinery

SF-580is a Automatic Lead Cutting And Bending Triode Forming Machine.Size:1500x1000x1500

1.Apply to LED/light emitting diode,Triode Forming Cutting Machine,aluminum electrolytic capacitor,metallic film capacitor,safety capacitor,quartz crystal and other upright type elements.

2. Import CAM mechanical transmission,precise stable,durable and low noise. Each part has the special hard coating with long service life.

3. The led Lead Forming Machine whole set of system is used PLC control with ultra strong stability.The operator interface is touch screen convenient and easy to lean and the data alignment is more convenient.

4. Speed control of the non-phase fine adjustment of transducer.

5. Upper clipand open clip system are rack and pinion type.The change of fixture centerline is invariant,no harm by clipping and more convenient to change the specification.(D4--(D6are shared the same fixture and(D8-(D10are shared the same fixture.

6. Molding pitch:2.0mm,2.5mm,5mm,7.50mm,10mm,15mm,20mm,25mm

7. Molding/feet cut method:odd leg,90℃bending,incurvature, excurvation and vertical angle,etc.

8. Length of feet cut:2.5mm-28mm.

9. Working pressure:4kg/Cm2

10.The special molding pattern can be customized according to the clients different requirements.

11. The equipment is anti-static.

The Bulk Resistor Radial Cutting Machine is suitable for shaping and cutting feet of various electronic components.Any details you want to know about Automatic Lead Forming Machine please contact us for further more.

Electronics Production Machinery

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com