Model |
3V110~410 |
3V120~420 |
3A110~410 |
3A120~420 |
Position and way NO. |
Two-position Three-way |
|||
Working Medium |
40Micron Filtered Air |
|||
Motion Pattern |
Inner Guide Type |
|||
Working-pressure |
0.15~0.8Mpa |
|||
Max Pressure Resistance |
1.2Mpa |
|||
Operating Temperature |
5~50°C |
|||
Voltage Range |
-10%~+10% |
|||
Power Consumption |
AC:4.5VAÂ DC:3W |
|||
Insulation &Protection Class |
F Class.IP65 |
|||
Electrical entry |
Lead Wire or Connector type |
|||
Highest Action Frequency |
5Cycle/Second |
|||
Response time |
0.05Second |
|||
Â
Model |
3V110~410 |
3V120~420 |
3A110~410 |
3A120~420 |
Position and way NO. |
Two-position Three-way |
|||
Working Medium |
40Micron Filtered Air |
|||
Motion Pattern |
Inner Guide Type |
|||
Working-pressure |
0.15~0.8Mpa |
|||
Max Pressure Resistance |
1.2Mpa |
|||
Operating Temperature |
5~50°C |
|||
Voltage Range |
-10%~+10% |
|||
Power Consumption |
AC:4.5VAÂ DC:3W |
|||
Insulation &Protection Class |
F Class.IP65 |
|||
Electrical entry |
Lead Wire or Connector type |
|||
Highest Action Frequency |
5Cycle/Second |
|||
Response time |
0.05Second |
|||
Â
Direct pressure type joint mold structure, fast clamping, slow, low pressure clamping action device, can ensure mold safety, fast speed, and increase output.
The hydraulic injection structure is special, the pressure tracking compensation device is built-in, the injection rate is fast, the injection pressure quality is stable, and the secondary injection pressure holding design makes the product high-quality and high-precision.
Medical Syringe Needles Injection, Injection Molding Equipment,Medical Product Machinery,Vertical Injection Molding Machine
Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.canyangmachine.com