Dajiao won the "Dual Generation Conference" award for quality of China's machinery industry

Recently, the 35th Quality Trustworthy Team and Quality Management Team Conference of the National Machinery Industry ("Double Congress") was held in Beijing with the theme of "Quality Revolution, Craftsmanship, Full Participation, and Post Innovation". Industry and Information Leaders of the Ministry of Chemical Industry, the General Administration of Quality Supervision, Inspection and Quarantine, and representatives from nearly a thousand machinery industry companies from across the country attended the conference.
honor certificate honor certificate

The Big Tooth Company selected seven outstanding QC teams to participate in the results display, and was eventually selected by the General Assembly to produce five QC teams that competed with representatives from FAW, Dongfeng, SAIC, Chery and many other machinery companies. The “HW19710 Transmission Cylinder Fault Improvement” achievement of the QC team of the Assemble Division Skills Workshop won the first prize of the National Machinery Industry Outstanding Quality Management Group's activities in 2016. This is the second consecutive year after 2015, it has won the first conference. The award was honored as "Outstanding QC Team for 2015-2016" by the General Assembly and received the award on behalf of the award winning QC team. The Assemble Department's skill workshop "reduces the gear shift failure of the HW gearbox", the QC group of the QC team of the shaft machining center and the synchronizer processing section of the grinding section, and the M-pass rate of the splined parts of the lifted parts. second prize. Engine gear heat front line "improved thin-wall gear cuttings machining accuracy", hot front second line "camshaft gear key tooth angle and pitch hole angle machining process improvement" and grinding gear heat after-production line QC team won the third class prize.

At the meeting, participants in the process of communicating and learning with their peers clearly understood their strengths and gaps and played a positive role in promoting the company’s QC team activities.

For SANY Cylinder Seal Kit

Installation steps for SANY hydraulic cylinder seals

Cylinder Seal Kit2
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.


For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany

Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com