The sludge grab truck can grab the semi-fluid (sludge, sand, etc.) and solids (stones, bricks, debris, etc.) in the deep and shallow manholes without leaving dead corners; easy to operate, safe and reliable; time-saving, Labor-saving and high-efficiency; no stains are left on the work site, which reduces secondary pollution and is beneficial to environmental protection; equipped with two large and small grabs, which can be freely replaced and used according to the excavation site. The original chassis of the second automobile Dongfeng is adopted, and the main boom lifting, main boom rotation, grab grab and release, rope winding, dump lifting, and body support are added.
The grab bucket of the sludge grab truck has a large diameter of 1400mm and a small diameter of 700mm; the grabbing depth can reach 14m; the grabbing power is not less than 3150Kg; two round grabs and square grabs. The automatic dredging machine for the sewage pipe of the dredging truck has a hydraulic motor and a turbine reducer on the frame. The front end of the turbine reducer is equipped with a rotating impeller, and both sides are driven by a crawler belt. It can dredge the underground pipeline 50 meters deep, especially for the places where construction waste, debris and silt are relatively solid. The front drill bit can drill through hard objects at will.
Screw & Barrel Segment,Screw Barrel Segment,Screw Segment Screw Barrel,Twin Screw Extruder Segment Barrel
ZHOUSHAN HONGTUO COMPANY , https://www.hongtuoscrew.com