High Intensity Metal Scrap Chopper Knife Cutting Blade

Metallurgy Machine Blade
 
Cold shear blade
 
This kind of Pipe Cutting Machine Blade is mainly used in the pipe production line system, and it moves in synchronization with pipes including paper tubes,brass,aluminum tubes, steel pipes etc.it slowly cuts into the center when rotates along the peripheral of tubes, then cuts off the tubes.
 
Hot shear blade
 
In hot-rolling, we use high-quality steel materials for the cutting tool, such as transverse cutting tool  produced by nickel-alloy steel(preferable heat resistance),which can be used to cut:
Hot-rolling thick billet, thick steel plate, steel ingot, steel bar etc.
 
Materials: 9CrSi,Cr12MoV,W6Mo5Cr4V2,W18Cr4V etc. 
Production Range:  
Our Features:
 
Our Advantages:
1. We are factory providing all kinds of cutting blades, also can manufacture according to your drawing.
2. Low MOQ (1pc is even acceptable in some special conditions)
3. Offering free and quick prototyping (normally 1 week)
4. A series of secondary service available, like casting; forging; welding; heat treatment etc.
5. Top quality guaranteed by skilled workers, managing system and status of facilities.
6. Customized size and spec /OEM available
7. Near Ningbo and Shanghai, convenient transportation


Our Mission:
Quality & Service: our always have been providing our clients with great quality products and superior customer service.
 
Quick LeadTime: We're dedicated to providing the quickest turnaround times and work very hard to ensure that all of your deadlines are met.
 
Unbeatable Prices We continuously strive to find ways to reduce our production costs, and pass the savings over to you! Metallurgy Machine Blade
 
Cold shear blade
 
This kind of Pipe Cutting Machine Blade is mainly used in the pipe production line system, and it moves in synchronization with pipes including paper tubes,brass,aluminum tubes, steel pipes etc.it slowly cuts into the center when rotates along the peripheral of tubes, then cuts off the tubes.
 
Hot shear blade
 
In hot-rolling, we use high-quality steel materials for the cutting tool, such as transverse cutting tool  produced by nickel-alloy steel(preferable heat resistance),which can be used to cut:
Hot-rolling thick billet, thick steel plate, steel ingot, steel bar etc.
 
Materials: 9CrSi,Cr12MoV,W6Mo5Cr4V2,W18Cr4V etc. 
Production Range:  
Our Features:
 
Our Advantages:
1. We are factory providing all kinds of cutting blades, also can manufacture according to your drawing.
2. Low MOQ (1pc is even acceptable in some special conditions)
3. Offering free and quick prototyping (normally 1 week)
4. A series of secondary service available, like casting; forging; welding; heat treatment etc.
5. Top quality guaranteed by skilled workers, managing system and status of facilities.
6. Customized size and spec /OEM available
7. Near Ningbo and Shanghai, convenient transportation


Our Mission:
Quality & Service: our always have been providing our clients with great quality products and superior customer service.
 
Quick LeadTime: We're dedicated to providing the quickest turnaround times and work very hard to ensure that all of your deadlines are met.
 
Unbeatable Prices We continuously strive to find ways to reduce our production costs, and pass the savings over to you!

Continuous Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

Flow-chat of Continuous Waste Plastic Pyrolysis Plant

Advantages of Continuous Waste Plastic Pyrolysis Plant

 1.  Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;

                  2.  Auto-loading, auto-discharging and oil coming out at the same time;

                  3.  Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

                  4.  Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;

                 5.  High efficiency condensers, more oil output, good quality oil, easy to clean.

                 6.  Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

                7.  National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

               8.  Easy to operate, need less manpower.

 

Technical Parameter of Continuous Waste Plastic Pyrolysis Plant

          

NO.	ITEM	Technical Parameter
1	Suitable Raw Materials	Small pieces of Waste tyre,rubber, waste plastic≤5cm
2	Operating Mode	Fully Continuous Operation
3	Structure	Horizontal Type Revolve
4	Loading and discharging	Fully Automatic Feeding and Discharging under High Temperature at Same Time
5	Capacity(24h)	8-20Mt
6	Work Pressure	Slightly Negative Pressure
7	Oil Yield of tyres	40%-45%
8	Reactor Rotational Speed	1R/M
9	Installation Power	110kw
10	Cooling Method	Cycle water
11	Type of Drive	Sprocket Wheel
12	Heating Method	Hot Air
13	Noise dB(A)	≤85
14	Main Reactor Weight (MT)	About 20Mt
15	Total Weight(MT)	About 45Mt
16	Installation Space Required	60m*20m
17	Manpower	2/shift
18	Shipment	5*40HC
19	Delivery time	≤70Days

 

 

 

 

 

 

Continuous Waste Plastic Pyrolysis Plant

Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl