SPD Australia Standard Conveyor Roller Set, Roller Conveyor

SPD Australia Standard Conveyor Roller Set, Roller Conveyor  Discripton: 

SPD-Australia Standard-114-279mm-6204

About our factory

SPD Conveyor Roller brand, 301 - 500 workers, 25000 m³ workshop, Registered Capital: RMB 69, 000, 000, 20 years experience, 35 Engineers and technicians, 28 Professional designers, 7 Senior engineers, 18 engineers, two hours to Qingdao port. 
Samples for testing are available. Rush order and large quantity are acceptable. 

SPD Products details: 

SPD Conveyor Roller Construction or according to your requirements:




SPD Roller Conveyor  Components Details: 


 

SPD Conveyor Roller Set, Roller Conveyor details:

1. Brand: SPD
2, Lift time: 30000-50000hours
3, Production capacity: as usual 600pieces/day.
4. Roller Diameter: 76-219mm.
5. Roller Length: 190mm to 3500mm.
6. Roller tube: Q235 carbon steel,high-precision ERW, welded with                 DIN2394 Standard.
7. Shaft: Q235 Carbon steel in accordance with DIN17100 and other                 equivalent standard, ISO h6 precision.
8. Bearing: Deep groove ball bearing with C3 clearance. 
9. Bearing brand: SKF,,NSK,LYC etc, or design according to your                  requirements.
10. Seals: Grease retaining inner seal with multi-stage labyrinth and                 retention cap with outboard rubbing flinger seal.
11. Color: according to your requirement.
12. Finish:  Ordinary painting/Rubber/Steel screw/Galvanized.
13. Welding: Mixed gas shielded arc welding end .
14. Professional designing and inspection team.
15. Standard: ISO/Australia/CEMA/JIS.
16.Package: Export standard plywood cases withwaterproofing film.  

Main Features of SPD Conveyor Roller Set, Roller Conveyor

• The bearing housing and steel tube are assembled  and welded  with a concentric automatic, welding machine.
•  Cuting of the steel tube and bearing is performed     with the use of a digital aute device/machine/equipment.
•  Fabrication of the roller is effected by an auto device and 100% tested for its concentricity.
•  Roller and supporting components/materials are   manufactured to ISO/BS/JIS/DIN//CEMA/Australia etc. standard. 

Rizhao Port Machine Main Facilities & Capabilities 



Cutting equipment: 
numberical control cutter machine, semi- manual cutter machines. 

Forming equipment: 
300T friction punching machine, 160T punching machine, mechanical plate shearing machine. 

Plate roll equipment: 
hydraulic four rolles plate roll equipment, mechanical three rolles plate roll equipment. 

Welding equipment: 
union melt welding, argon arc welding machine, carbon dioxide protection welding machine, AC arc welding machine, direct current arc welding machine. 

Test and MeasureInstruments: PaintFilmThickness Gauge, Buluowei hardness machine, Theodolite Magnetic Particle Flaw Detector, Metal gage, Ultrasonic Flaw Detector. 

Heat treatment: 
electric furnace, carburizing furnace. 

paint shop facilities: 
pneumatic paint shop facility, high- pressure paint shop facility. 


SPD Wood Chips Belt Conveyor Projects Installation on the sites


Packing and Shipping: 



                                              
Customer Visit from Different Countries


About Rizhao Port Machine Engineering Co., Ltd.


SPD famous Conveyor Roller brand, 301 - 500 workers, 25000 m³non-dust workshop,Registered capital: RMB 69,000,000,20years experience, 35 Engineers and technicians , 28 Professional designers, 7 Senior engineers,18 engineers, two hours to Qingdao port.

Samples are acceptable. Rush order and large quantity are acceptable. 

RZPMC is a comprehensive enterprise which engages in design, manufacture, installation and maintenance of the bulk-handling equipments. It is the wholly-owned subsidiary of the listed governmental company Rizhao port Co., Ltd. 
The main products are belt conveyor, stacker-reclaimer machine, car loader machine, un-loader machine, etc. We begin to make belt conveyor from the year 1993, and has lots of large contracts of manufactures and installation projects widely used in ports, mining, food, power plants and other industries. Our steel structures and frames production capacity is 160, 000 tons/year. In the year of 2005, we rely on our own technological superiority, self-design and manufacture the storage capacity of 9000 T/H of the stocker, as a national origination. 
 

SPD Australia Standard Conveyor Roller Set, Roller Conveyor  Discripton: 

SPD-Australia Standard-114-279mm-6204

About our factory

SPD Conveyor Roller brand, 301 - 500 workers, 25000 m³ workshop, Registered Capital: RMB 69, 000, 000, 20 years experience, 35 Engineers and technicians, 28 Professional designers, 7 Senior engineers, 18 engineers, two hours to Qingdao port. 
Samples for testing are available. Rush order and large quantity are acceptable. 

SPD Products details: 

SPD Conveyor Roller Construction or according to your requirements:




SPD Roller Conveyor  Components Details: 


 

SPD Conveyor Roller Set, Roller Conveyor details:

1. Brand: SPD
2, Lift time: 30000-50000hours
3, Production capacity: as usual 600pieces/day.
4. Roller Diameter: 76-219mm.
5. Roller Length: 190mm to 3500mm.
6. Roller tube: Q235 carbon steel,high-precision ERW, welded with                 DIN2394 Standard.
7. Shaft: Q235 Carbon steel in accordance with DIN17100 and other                 equivalent standard, ISO h6 precision.
8. Bearing: Deep groove ball bearing with C3 clearance. 
9. Bearing brand: SKF,,NSK,LYC etc, or design according to your                  requirements.
10. Seals: Grease retaining inner seal with multi-stage labyrinth and                 retention cap with outboard rubbing flinger seal.
11. Color: according to your requirement.
12. Finish:  Ordinary painting/Rubber/Steel screw/Galvanized.
13. Welding: Mixed gas shielded arc welding end .
14. Professional designing and inspection team.
15. Standard: ISO/Australia/CEMA/JIS.
16.Package: Export standard plywood cases withwaterproofing film.  

Main Features of SPD Conveyor Roller Set, Roller Conveyor

• The bearing housing and steel tube are assembled  and welded  with a concentric automatic, welding machine.
•  Cuting of the steel tube and bearing is performed     with the use of a digital aute device/machine/equipment.
•  Fabrication of the roller is effected by an auto device and 100% tested for its concentricity.
•  Roller and supporting components/materials are   manufactured to ISO/BS/JIS/DIN//CEMA/Australia etc. standard. 

Rizhao Port Machine Main Facilities & Capabilities 



Cutting equipment: 
numberical control cutter machine, semi- manual cutter machines. 

Forming equipment: 
300T friction punching machine, 160T punching machine, mechanical plate shearing machine. 

Plate roll equipment: 
hydraulic four rolles plate roll equipment, mechanical three rolles plate roll equipment. 

Welding equipment: 
union melt welding, argon arc welding machine, carbon dioxide protection welding machine, AC arc welding machine, direct current arc welding machine. 

Test and MeasureInstruments: PaintFilmThickness Gauge, Buluowei hardness machine, Theodolite Magnetic Particle Flaw Detector, Metal gage, Ultrasonic Flaw Detector. 

Heat treatment: 
electric furnace, carburizing furnace. 

paint shop facilities: 
pneumatic paint shop facility, high- pressure paint shop facility. 


SPD Wood Chips Belt Conveyor Projects Installation on the sites


Packing and Shipping: 



                                              
Customer Visit from Different Countries


About Rizhao Port Machine Engineering Co., Ltd.


SPD famous Conveyor Roller brand, 301 - 500 workers, 25000 m³non-dust workshop,Registered capital: RMB 69,000,000,20years experience, 35 Engineers and technicians , 28 Professional designers, 7 Senior engineers,18 engineers, two hours to Qingdao port.

Samples are acceptable. Rush order and large quantity are acceptable. 

RZPMC is a comprehensive enterprise which engages in design, manufacture, installation and maintenance of the bulk-handling equipments. It is the wholly-owned subsidiary of the listed governmental company Rizhao port Co., Ltd. 
The main products are belt conveyor, stacker-reclaimer machine, car loader machine, un-loader machine, etc. We begin to make belt conveyor from the year 1993, and has lots of large contracts of manufactures and installation projects widely used in ports, mining, food, power plants and other industries. Our steel structures and frames production capacity is 160, 000 tons/year. In the year of 2005, we rely on our own technological superiority, self-design and manufacture the storage capacity of 9000 T/H of the stocker, as a national origination. 
 

Injection Machine Water Chiller

Application
Almost of our Water Chiller can be used for plastic industry cooling, Both Air Cooled Water Chiller and Water Cooled Chiller is ok, so this depends on your choice and the local ambient condition. 
Feature
1) Chilled outlet water temperature range from 5°C to 35°C
2) Environmental friendly refrigerant R407c,R134a,R410a
3) Famous brand scroll Copeland/Danfoss Compressor
4) Built-in water pump and water tank
5) Shell and tube or tank with coil evaporator available
6) Precise microcomputer control system

Injection Machine Water Chiller

Injection Machine Water Chiller,Plastic Injection Machine Chiller,Economical Injection Machine Water Chiller,Customized Injection Machine Water Chiller

Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl