| CO2 Contact Tip/Welding Torch Tip Compatible for Binzel MB36KD/MB40KD/MB501D Torch | ||
| Material | CuCrZr | |
| Type | Â M8*30*0.8Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | |
| m8*30 0.9 | ||
| M8*30*1.0Contact tip | ||
| M8*30*1.2Contact tip | ||
| M8*30*1.4Contact tip | ||
| M8*30*1.6Contact tip | ||
| M8*30*2.0Contact tip | ||
| M8*30*2.4Contact tip | ||
| Packing | 50pcs/bag | |
| Certification | ISO9001, CCC, CE, ROHS, TUV | |
Company introduction:
1,ChangZhou LongRen Mechanical & Electrical CO.,LTD is one of leading manufactory of MIG/TIG/Plasma welding torch and parts in China for more than 20 yeas.
2.The company also provides welding accessories, such as electrode holder, earth clamp, welding helmet, cable joint, ceramic backups, electrode rods, welding wire
3.Various products certified by CE and ISO9001:2000 quality management system.
4.99% products are exported to all over the world and gain high reputation from customers on the basis of best quality and Service.
The inlaid spiral finned tube is to pre-process the spiral groove of a certain width and depth on the steel pipe, and then inlay the steel strip on the steel pipe on the lathe. During the winding process, due to a certain pre-tightening force, the finned tube steel strip will be tightly clamped in the spiral groove, thus ensuring a certain contact area between the steel strip and the steel tube. In order to prevent the steel strip from springing back and falling off, both ends of the steel strip should be welded to the steel pipe.
In order to facilitate inlaying, there should be a certain side clearance between the steel strip and the spiral groove. If the side clearance is too small and interference is formed, it will be difficult for the mosaic process to proceed smoothly. In addition, the wound steel strip always has a certain springback, as a result, the steel strip and the bottom surface of the spiral groove cannot be well joined. Inlaid fins can be carried out on general-purpose equipment, and the cost is not high, but the process is complicated and the production efficiency is low.
Inlaid Finned Tube,Inlaid Finned Tubes,Inlaid Fin Tube
Wuxi Mcway Equipment Technology Co., LTD , https://www.mcwayfinnedtube.com