This project is the first domestic ultra high pressure water flow cutting CNC machine tool, commonly known as "waterjet". The project adopts ultra-high pressure water flow technology, which can cut and penetrate plates of various thicknesses and materials, especially overcoming the phase change, chemical changes and physical changes of the material resulting from hot cutting, and is known as “cold cuttingâ€.
This project is the first domestic ultra high pressure water flow cutting CNC machine tool, commonly known as "waterjet". The project adopts ultra-high pressure water flow technology, which can cut and penetrate plates of various thicknesses and materials, especially overcoming the phase change, chemical changes and physical changes of the material resulting from hot cutting, and is known as “cold cuttingâ€. This project is widely used for cutting boards with different thicknesses and materials. Especially for materials that are difficult to cut, composite materials such as aramid and titanium alloys are the ideal or only processing methods. The
1. The inner core of the electric heat pipe is made of high-quality stainless steel or other materials, with a coat of PTFE, which is highly corrosion-resistant and suitable for heating various corrosive liquids.
2. Low surface power design (1.5kw /CM) to ensure the service life of the product.
3. The installation position of the electric heater should be paid attention to prevent the solid in the solution from depositing on the surface of the electric heater, or the liquid is too thick and the liquid level is too low, which will cause the teflon tube (PTFE) to be burnt due to the poor surface heat.
4. The shape is divided into vertical type and bottom heating "L" and "Z" type.
Teflon Electric​ Heater,PTFE Electric​ Heater,Teflon Ptfe Immersion Heater Element
Guangzhou Quanxu Technology Co Ltd , https://www.inkjetcoating.com