Resour Condensate Pump, Draining Pump Psb-1028, RS-1028

Specification:
1.Used for remove condensated water in inlaid type,ceiling suspended and disconnect-type air-conditioners,whichi can't be remover naturally.
2.Design has two parts:Pump room/control equipment.water storage tank add on automatic switch.The two parts' design mainly applied to equipment can be installed in all kinds of air-conditioners easily.This two parts can be installed in air-conditioners,or pump rooms/control storage tank is separated into three parts:start-up,cease and safety warning switch.
 

Feature:
1. Microsoft computer control without mistake;
2. Shaded pole motor torque force is powerful;
3. Exceptional exotherm protective equipment;
4. Overlarge diprosopia impeller, and powerful capacity of pollution discharge;
5. Wipe off mechanical noise from the pump;
6. Pump with the function of inverted valve, nerve caused current reversed because of the circumfluence by drain fall;
7.Isolated heat preservation design crust have not condensation of moisture and sweat;



Technical Date:
Model:PSA1028
Current Source:230V 50/60HZ or 1150v 60hz.
Suction Lift:Max.2M(6.5FT)
Thermal Protection >90ºC.
Flow rate:Max.12L/H(3.2GPH)
Tank Capacity:35cc
Mini splits up to 10KW(30,000 BTU/H)
Sound Level<25dbB(A)
Ambient Temperature:0-50ºC


Flow rate:

For the package:




If you were interested in our products,please say hi to us to get more specific information.
  Specification:
1.Used for remove condensated water in inlaid type,ceiling suspended and disconnect-type air-conditioners,whichi can't be remover naturally.
2.Design has two parts:Pump room/control equipment.water storage tank add on automatic switch.The two parts' design mainly applied to equipment can be installed in all kinds of air-conditioners easily.This two parts can be installed in air-conditioners,or pump rooms/control storage tank is separated into three parts:start-up,cease and safety warning switch.
 

Feature:
1. Microsoft computer control without mistake;
2. Shaded pole motor torque force is powerful;
3. Exceptional exotherm protective equipment;
4. Overlarge diprosopia impeller, and powerful capacity of pollution discharge;
5. Wipe off mechanical noise from the pump;
6. Pump with the function of inverted valve, nerve caused current reversed because of the circumfluence by drain fall;
7.Isolated heat preservation design crust have not condensation of moisture and sweat;



Technical Date:
Model:PSA1028
Current Source:230V 50/60HZ or 1150v 60hz.
Suction Lift:Max.2M(6.5FT)
Thermal Protection >90ºC.
Flow rate:Max.12L/H(3.2GPH)
Tank Capacity:35cc
Mini splits up to 10KW(30,000 BTU/H)
Sound Level<25dbB(A)
Ambient Temperature:0-50ºC


Flow rate:

For the package:




If you were interested in our products,please say hi to us to get more specific information.
 

CPD Actuator

By ceaseless studies and R&D investment since establishment, HYAC has acquired many essential source technologies. Recognized by global top automotive customers as strategical partners, HYAC is currently accelerating innovation and development.By many essential source technologies for automotive actuators and lots of NPI experience and knowhow with global top customers, HYAC keeps developing new products and opening new market such as charge port door actuators for electric cars.

Cpd Actuator,Car Electric Actuators,Car Power Charging Port Cover Actuator,Car Charger Cover Actuator

Haoyong Automotive Controls , https://www.haoyongauto.com