Rotary Drier for Sawdust/ Sand/ Slag (Dia 2800X15000)

Model NO.: Dia 2800x15000
Warranty: 2 Years
Color: Green
Customized: Customized
Condition: New
Model Number: 600X6000mm-3000X25000mm
Diameter: 600mm-3200mm
Length: 6000mm-30000mm
Application: Drying Sawdust, Sand, Slag, Vinasse
Drawing: Offer
Installation: Engineer Oversea Service
Spare Parts: Supply for Whole Using Life
After Sale Service: Supply for Whole Usi
Trademark: Hengxing
Transport Package: water and rust proof
Specification: National standard
Origin: Henan, china
 
Rotary dryer
Rotary Drier for Sawdust/ Sand/ Slag (Dia 2800X15000)
Rotary dryers are used for drying wet powders. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.
The rotary dryers can be used as calciners using direct or indirect firing.
Rotary Drier for Sawdust/ Sand/ Slag (Dia 2800X15000)
Rotary dryers Capacity: We can offer the rotary dryers with capacity range from 100kg/hr to 50000kg/hr product rate and operating temperatures up to 600-900 degree celsius.
Typical applications of rotary dryers include silica sand, minerals,etc.
type(mm) indiclination(%) rotation speed(r/min) input tempreture motor power(kw) outpur(t/h) weight(t) reforance
Φ 800× 8000 3-5 3-8 ≤ 700 4 0.8-2.0 3.5  
Φ 800× 10000 3-5 3-8 ≤ 700 4 0.8-2.5 4.5  
Φ 1000× 10000 3-5 3-8 ≤ 700 5.5 1.0-3.5 5.6  
Φ 1200× 10000 3-5 3-8 ≤ 700 7.5 1.8-5 14.5  
Φ 1200× 12000 3-5 3-8 ≤ 700 11 2-6 14.8  
Φ 1500× 12000 3-5 2-6 ≤ 800 15 3.5-9 17.8  
Φ 1800× 12000 3-5 2-6 ≤ 800 18 5-12 25  
Φ 2200× 12000 3-5 1.5-6 ≤ 800 18.5 6-15 33  
Φ 2200× 18000 3-5 1.5-6 ≤ 800 22 10-18 53.8  
Φ 2200× 20000 3-5 1.5-6 ≤ 800 30 12-20 56  
Φ 2400× 20000 3-5 1.5-5 ≤ 800 37 18-30 60  
Φ 2800× 15000 3-5 1.5-5 ≤ 800 40 20-35 72.5  
Φ 2800× 18000 3-5 1.5-5 ≤ 800 40 25-35 75  
Φ 3000× 20000 3-5 1.5-5 ≤ 800 55 28-40 80  
Φ 3000× 25000 3-5 1.5-5 ≤ 800 75 32-45 110  
Rotary Drier for Sawdust/ Sand/ Slag (Dia 2800X15000)

 Contact:
Ms Sara Pang
Mobile phone : : 0086137 8347 1727
 
 

Engine Oil Filler Cap

An oil filler cap is fitted to the oil filler pipe to cover the hole in which the engine oil is poured. It retains the Oil Pan in the oil and prevents it from overflowing or leaking into the engine compartment. Oil-filled caps can be made out of plastic, aluminum, steel, rubber, and metal. Although the position of an oil filling cap varies depending on the makeup and model of the car, it is usually easy to locate. It is usually located on the top of the engine, especially on the valve cover, which has an oil symbol on its surface. Other oil filling caps have the word "engine oil" on them.

Audi Engine Oil Filler Cap,Engine Oil Filler Cap Bmw,Bmw Engine Oil Filler Cap,Oil Filler Cap For Bmw

WENZHOU PETURS AUTO PARTS CO.,LTD , https://www.cnpeturs.com