The reporter learned from a number of social monitoring agencies that the international crude oil market has generally fluctuated and increased in recent years. On September 29, the domestic retail price limit for refined oil products will usher in a “two consecutive risesâ€, or about 130 yuan/ton.
Since the domestic refined oil price increase on September 15, the international crude oil market has been mixed. Recently, as Iranian officials claimed that if the United States withdraws from the nuclear agreement and the country can immediately resume nuclear activities when necessary, the market risk aversion is detonated, driving oil prices to jump sharply. As a result of the review by the Joint Technical Committee (JTC), the compliance of the oil-producing countries to the production reduction agreement rose to a maximum of 116% during the year in August, and the data released by Baker Hughes showed that the number of active drilling in the United States continued to decrease. It has brought more favorable support to the crude oil market. However, the US shale oil will continue to increase production, fuel efficiency and electric vehicles will increase the demand for gasoline in the United States. These negative factors affect the market. Under the multi-party news game, the crude oil futures market fluctuated slightly, but the overall price was higher.
As of September 23, Beijing time, WTI crude oil futures for November delivery rose 0.11 US dollars, or 0.22%, to 50.66 US dollars / barrel, a record high of four months, up 0.4% last week; Brent 11 Crude oil futures for the month also closed up by 0.43 US dollars, or 0.76%, to 56.86 US dollars / barrel, which rose about 2.2% this week, rising for four consecutive weeks.
Under this, the rate of change in crude oil extends in the positive range. According to the calculation of Jinlian, as of the sixth working day of September 25, the average price of reference crude oil is 53.83 US dollars / barrel, the rate of change is 3.62%, corresponding to the current round of gasoline and diesel may be raised 135 yuan / ton, Zhuo Chuang Information The measured rate of change in crude oil is 3.98%, and the price of gasoline and diesel is expected to increase by 137 yuan/ton.
Since the beginning of this pricing cycle, the international crude oil futures market has generally fluctuated and the overall rate of crude oil change is still at a high level. The market bullish atmosphere is getting stronger. The current domestic oil price increase is likely to be higher, or the 'two consecutive rises' can be achieved. Zhuo Xin Information Oil Products analyst Zhang Yixin believes.
Jin Lianchuang analyst Han Cong also judged that the international market will continue to fluctuate in the high range, and the current retail price (September 29) is not suspense. Benefiting from the demand for stocking before the holiday, the main domestic sales pressure is not large this month. Therefore, it is expected that the domestic refined oil market will remain at a high level this week, and some units that have completed sales tasks ahead of schedule may continue to push up.
Jin Lianchuang analyst Li Yang believes that in the fourth quarter, with the end of the summer demand season, international crude oil prices or pressures will fluctuate and fall, but the reduction of production in the later oil-producing countries is expected to continue to expand and the demand for heating oil in winter will be boosted. Crude oil may regain its upward trend. From the news point of view, there is little difference between the fourth quarter and the third quarter. As for the domestic refined oil market, with the end of the peak season of “Golden September and Silver 10â€, the consumption of refined oil products will gradually fade, which will make it difficult for the refined oil market to support.
OTO Pulley type wire drawing machine
The first Safety precautions for LZ600 wire drawing machine
1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.
1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.
1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.
1.4 It is prohibited for multiple people to operate the same equipment at the same time to avoid accidents.
1. 5 The electric control cabinet should be placed in a clean and dry room, and the door should be closed when working to prevent dust intrusion from causing device performance degradation or failure. Air conditioning is used to maintain the ambient temperature of the electric control cabinet. Frequently check the operation of the cooling fan on the top of the electric control cabinet.
1. 6 Before starting the machine, check whether the safety device is normal.
1. 7 Do not operate the components in the electrical cabinet with power. After cutting off the main power supply, wait at least five minutes, and wait until the intermediate circuit capacitance is discharged before operating the frequency converter, motor, or motor cable.
1.8 Do not touch the IC circuits on the inverter control interface board and motor control board, as static electricity may damage these circuits.
1.9 Please provide the power supply and operating environment according to the technical requirements of Section 3.2. It is not allowed to arbitrarily change the parameters of the frequency converter and PLC. The user shall be responsible for any damage to electrical components caused by human factors.
The second Delivery inspection
2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.
2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.
2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use
OTO type wire drawing machine,pulley type wire drawing machinery
Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com