The occurrence of Spodoptera exigua in China is increasing and it gradually becomes a common pest. Therefore, the research on Spodoptera exigua must be more and more in-depth due to its natural seasonality and feeding conditions for artificial rearing. In order to effectively solve this problem, the authors conducted an indoor test and found out that an artificial climate incubator was used to subculture Spodoptera exigua in order to limit the requirements. Effective technology.
The cultivation of Spodoptera exigua in artificial climate incubators requires the control of temperature and humidity. Artificial feed is the key to successful breeding. Improper feed formulation is prone to population decline. Subcultures are poor, and it is difficult to obtain a healthy source of insects. The accuracy of the relevant test results.
The research of the artificial climate incubator found that in order to obtain the subculture of beet armyworm, each of the above technical aspects should be rigorously treated, and the feeding conditions cannot be greatly adjusted. There must not be a large number of people in the breeding environment to avoid frequent contamination. The size of the feed block should be suitable. If it is too large and does not match the finger tube, it will also cause waste. If it is too small, it will not be able to meet the needs of several instars. When we add feed again, the chance of contamination increases greatly. Disinfection must be carried out in strict accordance with the cycle, and we cannot be fortunate.
The cultivation of Spodoptera exigua in artificial climate incubators requires the control of temperature and humidity. Artificial feed is the key to successful breeding. Improper feed formulation is prone to population decline. Subcultures are poor, and it is difficult to obtain a healthy source of insects. The accuracy of the relevant test results.
The research of the artificial climate incubator found that in order to obtain the subculture of beet armyworm, each of the above technical aspects should be rigorously treated, and the feeding conditions cannot be greatly adjusted. There must not be a large number of people in the breeding environment to avoid frequent contamination. The size of the feed block should be suitable. If it is too large and does not match the finger tube, it will also cause waste. If it is too small, it will not be able to meet the needs of several instars. When we add feed again, the chance of contamination increases greatly. Disinfection must be carried out in strict accordance with the cycle, and we cannot be fortunate.
The product structure is firm, the size is accurate,and can be customized for various vehicle models,which can be designed, developed and manufactured independently according to customer requirements, the customer unanimously gives the high praise,
the specific price is subject to the quotation of the salesperson at that time, welcome to consult
Metal Parts Stamping,Stainless Steel Stamping Product,Aluminium Stamping Parts,Stamping Of Sheet Metal Parts Product
NINGBO YINZHOU HONGBO AUTOPARTS CO., LTD., , https://www.honghuaqiye.com