If it is the transformation of an old house or the decoration of a new house, home central air conditioning can be installed, but many owners worry that after the installation of home central air conditioning will not be enough? So how much space does the home central air-conditioning ceiling need? After installation, how high should the home central air-conditioning be? With these questions, we will answer them one by one today.
First, home central air conditioning size:
The common domestic central air-conditioning ducts are basically 200mm thick. Of course, the size and thickness are not specified. The duct thicknesses of different manufacturers are also different. Therefore, when installing, it is more important to pay attention to where the fan coil is installed. The power consumption in different locations is not the same, and it also has some impact on cooling and comfort.
Second, home central air conditioning ceiling space:
Before installation, it is necessary to clearly understand the height of the house. If the height is not enough, everything will not be discussed. At present, in the newly-buy house, the developer will reserve part of the floor height for the owners to install air-conditioning and floor heating. The basic home central air-conditioning ceiling will occupy about 10-20cm of the floor height. When installing, it needs more attention. It is a place to be reserved between the pipeline and the indoor host when the central air conditioner is installed. Avoid noise caused by collisions between pipes and pipes.
Third, home central air conditioning for height
Some owners, worried that the storey height is not enough, will put the central air-conditioning indoor unit in a very high position all at once. Generally, the indoor unit is suitable for 1.8 to 2.2 meters from the ground. If it exceeds this height, not only Affects air conditioning, refrigeration, and comfort. It also causes great difficulties for the after-sales staff in the post-maintenance.
All in all, the general floor plan can also be installed with central air conditioning at a height of about 2.6 meters. If the height of the floor is too short, you do not need to worry about it. You can use a partial ceiling or use a vertical wind disk to install it.
RYL Fuel Filters are installed in the tester and engine test cell fuel oil supply system of aviation system, to filter solid particle and slimes in medium and effectively control cleanliness.
Filter Element adopts many kinds of materials, such as glass fiber, stainless steel sintered fiber felt, stainless steel wire mesh ect.
Working pressure (max): 0-1.6 MPa
Operating medium: Fuel, RP-1, RP-2, RP-3
Fuel Filter,Separator Filter,Low Pressure Fuel Filter,Ryl Fuel Filters
Xinxiang Tianrui Hydraulic Equipment CO.,LTD , https://www.trfiltration.com