Recently, Mitsubishi Motors Sales (China) Co., Ltd. and Southeast (Fujian) Automobile Industry Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to start from August 25, 2015. , recalled the following parts of the car, a total of 362 vehicles:
Mitsubishi Motors Sales (China) Co., Ltd. imported a total of 35 Lancer Wing Lushen cars produced between March 6, 2007 and June 16, 2007;
The southeast (Fujian) Automobile Industry Co., Ltd. produced 327 vehicles from Mitsubishi Junge Automobile from January 18, 2008 to December 31, 2008.
Due to the airtightness and temperature of the airbag gas generator, some vehicles in this recall may invade the airbag. After long-term use, the airbag gas generating agent may be exposed to moisture, resulting in a decrease in the density of the airbag gas generating agent. When the airbag is deployed, the pressure inside the gas generator is too high, and the airbag may not be able to expand normally, posing a safety hazard. Mitsubishi Motors Sales (China) Co., Ltd. and Southeast (Fujian) Automobile Industry Co., Ltd. will replace the airbag gas generators for free for vehicles within the scope of the recall.
Mitsubishi Motors Sales (China) Co., Ltd. and Southeast (Fujian) Automobile Industry Co., Ltd. will actively contact relevant users through their authorized service outlets to arrange recalls. Users can call the Southeast (Fujian) Automobile Industry Co., Ltd. service hotline 400-661-1666; Mitsubishi Motors Sales (China) Co., Ltd. service hotline 800-820-6630, 400-821-6630 for consultation. Owners can also visit the AQSIQ website (), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the AQSIQ Defective Product Management Center hotline to reflect problems during the implementation of the recall or submit defects.
Tungsten Carbide Planer Knives
Our blade part is brazed tungsten carbide, the finished blade part size can ensure 10x1mm, The material is high hardness (HRA88~90) and virginal fine particles of tungsten carbide. Our factory accumulate rich experince for welding, the finished product is seamless, without overflowing, relieving of internal stress, then processed with precise grinding machine. They are good working for a variety of hard woods. With the features of good red hardness, less than 400mm length Wood Planer Knives edge straightness error < 0.05mm. Besides, they are strong resistance to abrasion, sharp blade, smooth planed surface, no distortion and no crack.
Tungsten Carbide Planer Knives,Tungsten Carbide Planer Blades,Tungsten Planer Blades,Tungsten Carbide Planer Knife
SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.sichuankenlarcutters.com