Stainless Steel Cooling Tank for Fresh Milk 5000L Cooling Tank

 stainless steel cooling tank for fresh milk 5000L cooling tank 
(cooling fresh milk from 35 to 4degree , 2 hours time needed)

Supply & Installation of 500 Liter (Direct Expansion / Farm Milk Cooling Tank / Two Milking):
          √    Type  :    Direct Expansion type Milk Cooling Tank, (Two Milking).
          √    Model :     OM /DX 500 L, 2 T. Horizontal
           √    Milk/insulation vessel   :     2.0/0.9 mm thick Stainless steel AISI 304
           √   Evaporator  :  0.9/1.0 mm thick Stainless steel AISI 304
                                                      (Laser welded with milk vessel) 
          √  Test /Burst pressure of evaporator   :     36 / 64 Bar                                                                  
         √    Lid cover   :    1.5 mm thick Stainless Steel 304, mounted with 2 Nos springs, Milk pouring opening with plastic cover
        √  Compressor  :   Copeland (Make: USA)
        √  Insulation  :  Polyurethane foam insulation, 32-90 mm thick, 38-40 Kgs / M3 density. Environment friendly
                                                     We offer 50mm thickness , 40 kg/m3
         √  Electric/control panel     :       100% automatic/ digital type
        √  Legs  :  Legs Stainless Steel with Stainless Steel adjustable Bolts
        √  Milk agitation     :  S.S blade driven by slow speed Agitator, 30 RPM, Imported- Level switch
                                                    We offer 36rpm  agitator speed
        Milk Measuring   :  Calibrated Dip Stick provided with Milk Reading chart
        √  Butter Fly Valve at 
Milk outlet  :  Stainless Steel DN 50 with SMS thread and Milk stopper
        √  Milk thermometer :  Digital 
        √  Milk thermostat  :  Digital
        √  Refrigerant Control    :    Thermostatic Expansion Valve with MOP function - Danfoss. 
        √  Milk Temperature Controller :Digital from EU and incorporating time delay function for Compressor start up
 
COOLING UNIT : Mounted on the Tank, Designed for higher ambient -46 °C of following specs: 

1. Air Cooled Condenser √
2. Cover for Condensing Unit (Material for cover shall be SS)
3. Energy efficient statically / dynamically balanced fan motor assembly √
4. CFC free refrigerant. (R-404) √
5. Liquid receiver with valves is included in the cooling machine (with By-pass valve arrangement) √
6. 1.75 / 2 HP capacity - Hermetic Reciprocating compressor, 1 phase / 220 Volt - 50 hertz rating √
7. Contactor / overload relays from MG France/Equivalent √
8. Potential relay from EU / Equivalent. √
9. Starting capacitor from FUJI. √
10. LP/HP Switch, Filter driver and sight glass from Danfoss. √
11. Liquid line solenoid valve with timer arrangement. √
12. Under voltage/over voltage protection relay from EU/Equivalent. √

 
Payment:      within 30 days of after submission of invoice. √
 Warranty:-
Extended Warranty for the following parts of Milk Cooling Tank from the date of installation:
           a)   Evaporator against leakage :      60 months
            b)     Compressor :      24 months                                                         
           c) Condenser fan motor assembly :      12 months 
            d)     Agitator motor :      12 months 
            e)   Refrigerant leakage :      03 months
             f)     Milk Temperature controller (PLC Module)    :      12 months 
            We offer 12 months warranty fro all the parts of the milk cooling tank

Response Time to attend -    during warranty period.

1. Within 300 KM from Vendor's facility: 24-36 Hrs. of complaint received (Complaint to be logged in via email to vendor at least 2 hours before close of working hours).    √
2. Beyond 300 KM from Vendor's facility: 36 -48 Hrs. of complaint received (Complaint to be logged in via email to vendor at least 2 hours before close of working hours).    √ We offer timely service , we work 16hours every day, and  you can get timely warranty service in at most 16 hours. This why we can get more and more customers.

 
Technical specification for 5000Liter milk cooling tank

The Howo spare truck parts cover all the sinotruk serial truk parts. Our main product cover: HOWO 07/08/10 model, A7, T7, C5 and etc. We can provide you the realiable quality and best price truck parts to maintance your after market service. Our main product:

- Brake System which including following items: Brake drum; Brake Pad; Brake linning; Brake shaft and etc;

HOWO Braking System Parts

Howo Braking System Parts,Brake Rotors,Disc Brake Rotor,Front Brake Pads

Jinan JF Co., Ltd , https://www.jfsinotruk.com