Use Quench Oil Purification Unit (Series TYQ)

Model NO.: TYQ
Type: Suction Filter
Power Supply: 380V/415V/480V
Heating Power: 12kw
Size: 1500X950X1650 mm
Delivery Time: Within 5 Days After Payment
Warranty Period: 2 Years
Net Weight: 400 Kg
Trademark: TOP
Transport Package: Wooden Case
Specification: CE, SGS
Origin: Chongqing, China
HS Code: 84212990

Use Quench Oil Purification Unit (Series TYQ), Maintain the oil's quench speed and cooling rates, Reduce the chance of fire

 

Quenching oil puruficator equipment 
1. remove particles, water, gas, air, ash 
2. Maintain oil's quench speed and cooling rate 
 

 

Quenching oil puruficator equipment Series TYQ, Maintain the oil's quench speed and cooling rates,  Reduce the chance of fire

 

Quenching Oil Purification Unit Series TYQ, oil filtering, oil recycling, waste oil reprocessing, renew old oil
remove particle , water, free moisture, gas ect.

 

Operating and maintaining quench systems can be a complex undertaking. Quench oils with operating temperatures between 195°F and 395°F typically face a number of operational issues including particulate contamination, water contamination and chemical alteration.

All of these factors can change the viscosity of the quench oil, which eventually affects the quality of the heat-treating process. If contamination occurs, it is expensive to drain, dispose of, and replace the oil - not to mention the time required to do it.

Series TYQ oil purification systems are designed specifically for filtering quench oils.  It is used for vacuum dehydration and degasification for quench oil in order to withdraw free and soluble water, gas as well as for removal of particulates. The system consists of pre-filter, second filter and fine filter , oil heater, vacuum pump, vacuum vessel ect.

 

Our machine will clean the oil continuously and provide the following benefits:

 Maintain the oil's quench speed and cooling rates

 Reduce the chance of fire by maintaining a higher flash point

 Improve quench quality and reduce the number of rejected parts

 Extend the life of quench oils, reducing oil purchases.


Use Quench Oil Purification Unit (Series TYQ)
Our oil filtration machine: 
Series ZY Single-Stage Vacuum Transformer Oil Purifier 
Series ZYD Double High Vacuum Transformer Oil Purifier 
Series ZYB Multiply-Function insulating oil treatment machine 
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit 
Series TYB Portable light Fuel oil purification machine 
Series TYD Vacuum dehydrator 
Series TYF Phosphate ester fire-resistance oil purifier 
Series PL Plate pressure oil purifier 
Series TYD Vacuum dehydrator 
Series EFD Explosion protection filtration machine 
Series BAM Press filtration system 
Series ZKCC Vacuum pumping device 
Series COP Cooking oil purification machine 
Series CYS Centrifugal oil purification machine 
Series JL Portable oil filtering and oiling machine 
Series EOR series waste engine oil recycling system
 

arameters Unit TY Q -10 TY Q  -20 TY Q -30 TY Q -50 TY Q  -100 TY Q  -150 TY Q  -200 TY Q  -300
Flow rate L/h 600 1200 1800 3000 60 00 9000 12000 18000
Vacuum degree M pa -0.0 6  ~- 0. 095
Working pressure Mpa ≤ 0. 4
Temperature degree  C 0~100
Power supply   3Phase, 380V, 50Hz(or as needed)
Working noise dB(A) ≤ 7 5 ≤ 75 ≤ 75 ≤ 7 8 ≤ 7 8 ≤ 78 ≤ 80 ≤ 8 2
Electric heating power KW 36 40 45 72 80 90 120 135
Total  electric  power KW 38 42 47 75 87 101 135 147
Inlet ( outlet) caliber mm 25 25 25 32 42 50 50 60
Size mm 1500x1000x   1600 1500x1050x   1600 1500x1050x1650 1600x1150x1700 1750x1150x1750 1900x1600x1950 1950x1600x1950 2100x1600x2000
Weight Kg 350 38 0 400 450 550 650

Plastic Injection Insert Molding

1. The combination of the easiness of molding and bending of resin and the rigidity, strength and heat resistance of metal can make complex and sophisticated metal-plastic integrated products sturdily.

2. In particular, the combination of the insulation of resin and the electrical properties of metal can meet the basic functions of electrical products.

3. The pre-forming combination of multiple inserts makes the post-engineering of product unit combination more reasonable.

4. Insert products are not limited to metal, but also cloth, paper, wire, plastic, glass, wood, wire ring, electrical parts and so on.

5. For rigid parts and flexible parts on rubber sealing pad, the complex operation of arranging sealing ring can be eliminated after the integrated products are made by injection molding on the matrix, which makes the automatic combination of the following process easier.

6. Because it is the fusion of molten material and metal insert, compared with the pressing molding method, the metal insert gap can be designed to be narrower, and the reliability of composite product molding is higher.

7. Suitable resin and molding conditions may be used for sealing and fixation of susceptible products such as glass, coils, electrical parts, etc.

8. Inserts can also be completely sealed into the resin by selecting the appropriate mold construction.

9. After the insert is molded, it can also be made into a product with hollow grooves along with the core hole.

10. The combination of vertical injection molding machine and manipulator, the whole row device of insert products, etc., the insert forming engineering can be mostly automated production.Img 9519

Plastic Injection Insert Molding,Washing Machine Plastic Injection Moulds,Plastic Injection Molding,Plastic Injection Molding Machine

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com